https://scholars.lib.ntu.edu.tw/handle/123456789/60617
標題: | Deformations of a Clamped-Clamped Elastica inside a Circular Channel with Clearance | 作者: | Lu, Zhi-Hao Chen, Jen-San |
關鍵字: | Circular channel; Constrained elastica; Deformation patterns | 公開日期: | 2008 | 卷: | 54 | 期: | 9 | 起(迄)頁: | 2470-2492 | 來源出版物: | International Journal of Solids and Structures | 摘要: | In this paper, we study the planar deformations of an elastica inside a circular channel with clearance. One end of the elastica is fully clamped, while the other end is partially clamped in the lateral direction and is subject to a pushing force longitudinally. In the experiment we first observe various deformation patterns after pushing the elastica through the partial clamp. Both symmetric and asymmetric deformations are recorded. Special attention is focused on the contact conditions between the elastica and the circular channel. In order to analyze the elastica deformation theoretically, we first divide the elastica into several elementary sub-domains depending on the contact condition between the elastica and the circular channel. In each sub-domain the elastica is either loaded only at the ends or in full contact with the outer wall. Armed with these basic equilibrium analyses, we proceed to calculate and classify the loaded elastica into several deformation patterns. Finally, we present the load-deflection curves, both theoretically and experimentally, which relate the longitudinal forces at both ends to the elastica length increase inside the channel. The branching phenomena predicted theoretically agree fairly well quantitatively with the experimental measurements. © 2007 Elsevier Ltd. All rights reserved. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/85564 https://www.scopus.com/inward/record.uri?eid=2-s2.0-40649112819&doi=10.1016%2fj.ijsolstr.2007.12.004&partnerID=40&md5=46be06610a9e6d443ae37dcc12789eee |
ISSN: | 00207683 | SDG/關鍵字: | Curve fitting; Deformation; Force measurement; Constrained elastica; Deformation patterns; Elasticity |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。