dc.relation.reference | [1] Hunter, R. J. (1989). Foundations of colloid science. Vol.1, Oxford Univ. Press, London
[2] Wu, R. M.; Lee, D. J. (1998). Hydrodynamic drag force exerted on a moving floc and its implication to free-settling tests. Water Res., 32, 760-768.
[3] Chu, C. P.; Lee, D. J. (2001). Sludge treatment (II): Sludge pretreatments. Bulletin of the College of Engineering, N. T. U., 82, 49-76.
[4] Kuo, C. C. (1997). Formation of ferric hydrous oxides particles and its stability in a colloidal dispersion. Master thesis, N. T. U.
[5] Lee, D. J.; Chen, G. W.; Liao, Y. C.; Hsieh, C. C. (1996). On the free-settling test for estimating activated sludge floc density. Water Res., 30, 541-550.
[6] Beavers, S. G.; Joseph, D. D. (1967). Boundary condition at a naturally
permeable wall. J. Fluid Mech., 30, 197-207.
[7] Chen, S. B. (1998). Axisymmetric motion of multiple composite spheres: Solid core with permeable shell, under creeping flow conditions. Physics of Fluids, 10, 1550-1563.
[8] Brinkman, H. C. (1947). A calculation of the viscous force exerted by a flowing fluid on a dense swarm of particles. Appl. Sci. Res., A1, 27-35.
[9] Chu, C. P.; Lee, D. J. (2001). Sludge treatment (I): Introduction and floc characteristics. Bulletin of the College of Engineering, N. T. U., 81, 47-58.
[10] Wu, R. M.; Lee, D. J. (1998). Hydrodynamic drag force exerted on a highly porous sphere moving towards an impermeable plate. Chem. Eng. Sci., 53, 3571-3578.
[11] Wu, R. M.; Lee, D. J. (1999). Highly porous sphere moving through centerline of circular tube filled with Newtonian fluid. Chem. Eng. Sci., 54, 5717-5722.
[12] Wu, R. M.; Lee, D. J. (2001). Hydrodynamic drag on non-spherical floc and free-settling test. Water Res., 35, 3226-3234.
[13] Wu, R. M.; Lee, D. J. (2003). Hydrodynamic drag on two porous spheres moving along their centerline. Chem. Eng. Sci., 59, 943-950.
[14] Jorand, F.; Zartarian, F.; Thomas, F.; Block, J. C.; Bottero, J. Y.; Villemin, G.; Urbain, V.; Manem, J. (1995). Chemical and structural (2D) linkage between bacteria within activated sludge flocs. Water Res., 29, 1639-1647.
[15] Veerapaneni, S.; Wiesner, M. R. (1996). Hydrodynamics of fractal aggregates with radially varying permeability. J. Colloid Interface Sci., 177, 45-57.
[16] Li, D. H.; Ganczarczyk, J. (1990). Structure of activated sludge flocs.
Biotechnol. Bioeng., 35, 57-65.
[17] Li, D. H.; Ganczarczyk, J. (1988). Flow through activated sludge flocs. Water Res., 22, 789-792.
[18] Hsu, J. P.; Hsieh, Y. H. (2002). Drag force on a floc in a flow field: two-layer model, Chem. Eng. Sci., 57, 2627-2633
[19] Hsu, J. P.; Hsieh, Y. H. (2003). Drag force on a porous, non-homogeneous spherodial floc in a uniform flow field. J. Colloid Interface Sci., 259, 301-308.
[20] Hsu, J. P.; Hsieh, Y. H. (2003). Boundary Effect on the Drag Force on a Non-Homogeneous Floc. J. Colloid Interface Sci., 264, 517-525.
[21] Hsu, J. P.; Hsieh, Y. H. (2004). Moving of a Non-homogeneous, Porous Floc Normal to a Rigid Plate. J. Colloid Interface Sci., 275, 309-316.
[22] Happel, J.; Brenner, H. (1983). Low Reynolds number hydrodynamics. New York: Academic Press.
[23] Neale, G.; Epstein, N.; Nader, W. (1973). Creeping flow relative to permeable spheres. Chem. Eng. Sci., 28, 1865-1874.
[24] Mao, Z. S.; Wang, Y. (2003). Numerical simulation of mass transfer of a spherical particle assemblage with the cell model, Powder Technol., 134, 145-155
[25] Jaiswal, A. K.; Sundararajan, T.; Chhabra, R. P. (1991). Hydrodynamics of Newtonian fluid flow through assemblages of rigid spherical particles in intermediate Reynolds number regime. Int. J. Engng Sci., 29, 6, 709-716.
[26] Bird, R. B.; Stewart, W. E.; Lightfoot, E. N. (1960). Transport Phenomena. New York: John Wiley & Sons.
[27] Tsou, G. W.; Wu, R. M.; Yen, P. S.; Lee, D. J.; Peng, X. F. (2002). Advective flow and floc permeability. J. Colloid Interface Sci., 250, 400-408.
[28] Wu, R. M.; Lee, D. J.; Waite, T. D.; Guan, J. (2002). Multi-level structure of sludge flocs. J. Colloid Interface Sci., 252, 383-392.
[29] Fluid Dynamics International, Inc. (1993). FIDAP7.0 Theory.
[30] Zhou, C. H. (1998). Simulation of the optimal nozzle design in continuous casting process. Master Thesis, N.T.U. | en |