https://scholars.lib.ntu.edu.tw/handle/123456789/611924
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Chen C.-J. | en_US |
dc.contributor.author | Chang C.-L. | en_US |
dc.contributor.author | Hung M.-W. | en_US |
dc.contributor.author | Jywe W. | en_US |
dc.contributor.author | Teng Y. | en_US |
dc.contributor.author | Wen-Yuh Jywe | en_US |
dc.creator | Chen C.-J.;Chang C.-L.;Hung M.-W.;Jywe W.;Teng Y. | - |
dc.date.accessioned | 2022-05-24T06:26:35Z | - |
dc.date.available | 2022-05-24T06:26:35Z | - |
dc.date.issued | 2012 | - |
dc.identifier.uri | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84864241859&doi=10.1109%2fI2MTC.2012.6229248&partnerID=40&md5=e1ab5d83f1f304553c325511f49dbc46 | - |
dc.identifier.uri | https://scholars.lib.ntu.edu.tw/handle/123456789/611924 | - |
dc.description.abstract | There are over 2000 capillaries in one large spinneret. Finding each capillary and designing its inspection path is very important. This paper develops a method of finding all capillaries and auto arranging inspection path that decreases inspection time significantly. The method applies to an existing automatic spinneret inspection which includes a three-axis motorized stage, a telcentric lens, two LED light sources, a CCD camera and a personal computer. This paper tested a large ring-type spinneret using the presented method and system in this paper. Inspecting 2016 capillaries only require approximately 800 s. ? 2012 IEEE. | - |
dc.relation.ispartof | 2012 IEEE I2MTC - International Instrumentation and Measurement Technology Conference, Proceedings | - |
dc.subject | auto path arrangement | - |
dc.subject | Inspection system | - |
dc.subject | Inspection time | - |
dc.subject | LED light source | - |
dc.subject | Motorized stage | - |
dc.subject | Path generation | - |
dc.subject | Path generation methods | - |
dc.subject | Three-axis | - |
dc.subject | Capillarity | - |
dc.subject | Light emitting diodes | - |
dc.subject | Light sources | - |
dc.subject | Personal computers | - |
dc.subject | Inspection | - |
dc.title | Developing a fast inspection path generation method for an automatic spinneret inspection system | en_US |
dc.type | conference paper | en |
dc.identifier.doi | 10.1109/I2MTC.2012.6229248 | - |
dc.identifier.scopus | 2-s2.0-84864241859 | - |
dc.relation.pages | 1452-1455 | - |
item.cerifentitytype | Publications | - |
item.fulltext | no fulltext | - |
item.openairecristype | http://purl.org/coar/resource_type/c_5794 | - |
item.openairetype | conference paper | - |
item.grantfulltext | none | - |
crisitem.author.dept | Mechanical Engineering | - |
crisitem.author.parentorg | College of Engineering | - |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。