https://scholars.lib.ntu.edu.tw/handle/123456789/611998
Title: | The application of the double-readheads planar encoder system for error calibration of computer numerical control machine tools | Authors: | Liu C.-H. Jywe W.-Y. Hsu T.-H. Wen-Yuh Jywe |
Keywords: | Calibration;Computer control;Dynamic mechanical analysis;Encoding (symbols);Error analysis;Systems analysis;Computer numerical control (CNC) machine tools;Contouring tests;Planar encoder systems;Volumetric errors;Numerical control systems | Issue Date: | 2004 | Journal Volume: | 218 | Journal Issue: | 9 | Start page/Pages: | 1077-1089 | Source: | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | Abstract: | This paper presents a useful measuring method for rapidly verifying geometric errors using a double-readheads planar encoder system. The system is capable of comparing the displacement measurements between two parallel lines simultaneously when the machine axes are moved. With the calculated model and the various specified test paths, the proposed measuring method provides rapid performance, simplicity of set-up, low cost and pre-process verification of computer numerical control (CNC) machine tools. Complete set-ups and procedures for geometric error verification are clearly presented. Also, the proposed system tested the dynamic performance of the CNC machine tools. It is an integrated system that can complete both dynamic performance and the geometric verification of CNC machine tools. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-6344249370&doi=10.1243%2f0954405041897194&partnerID=40&md5=3cacf51a82c49bb6384b062584c6e4dc https://scholars.lib.ntu.edu.tw/handle/123456789/611998 |
DOI: | 10.1243/0954405041897194 |
Appears in Collections: | 機械工程學系 |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.