https://scholars.lib.ntu.edu.tw/handle/123456789/61401
標題: | Fabrication of a Piezoelectric Impact Hammer and Its Application to the In-situ Nondestructive Evaluation of Concrete | 作者: | TONG, J.-H. WU, T.-T. LEE, C.-K. |
關鍵字: | piezoelectric material;impact hammer;concrete;elastic wave | 公開日期: | 2002 | 出版社: | Taipei:National Taiwan University Dept Chem Engn | 起(迄)頁: | - | 來源出版物: | Jpn. J. Appl. Phys. 41(2002), 6595–6600 | 摘要: | In this paper, a piezoelectric impact hammer is designed and fabricated for generating stable repeated impact elastic waves and further for in-situ wave velocity measurements of concrete specimens. The piezoelectric impact hammer consists of a stacked multilayer PZT, a flying head system with an on-line load cell embedded and a holding fixture. To measure the longitudinal or Rayleigh waves of a concrete specimen, two horizontally polarized conical transducers are utilized to receive the elastic waves generated by the piezoelectric impact hammer. Due to the stable impact generation of the piezoelectric impact hammer, the experimental results showed that the accuracy of the wave velocity measurement was enhanced significantly through the signal averaging. Since the impact time origin of the newly designed impact hammer can be determined accurately, it was utilized to measure the depth of a normal surface-breaking crack in a concrete specimen, and the result is very accurate. We note that the results of this study offer a precise and convenient way of measuring in-situ elastic properties and/or crack depth of concrete specimens. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/200611150121952 | 其他識別: | 246246/200611150121952 |
顯示於: | 化學工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。