dc.relation.reference | Antolini, E., L. Giorgi, A. Pozio, and E. Passalacqua, “Influence of Nafion Loading in the Catalyst Layer of Gas-Diffusion Electrodes for PEFC”, J. Power Sources, 77, 136-142 (1999).
Almeida, S. H. and Y. Kawano, “Thermal Behavior of Nafion Membranes”, J. Therm. Anal., 58, 569-577 (1999).
Ayad, A., Y. Naimi, J. Bouet, and J. F. Fauvarque, “Oxygen reduction on platinum electrode coated with Nafion”, J. Power Sources, 130, 50-55 (2004).
Bard, A. J. and L. R. Faulkner, Eelectrochemical Methods — Fundamentals and Applications, Wiley, New York, U.S.A. (2001).
Carrette, L., K. A. Friedrich, and U. Stimming, “Fuel Cells — Fundamentals and Applications”, Fuel Cells, 1, 1 (2001).
Chalk, S. G., J. F. Miller, and F. W. Wagner, “Challenges for Fuel Cells in Transport Applications”, J. Power Sources, 86, 40 (2000).
Chu, D., D. Tryk, D. Gervasio, and E. B. Yeager, “Examination of the ionomer/electrode interface using the ferric/ferrous redox couple ”, J. Electroanal. Chem., 272, 277-284 (1989).
Ciureanu, M. and H. Wang, “Electrochemical Impedance Study of Electrode Membrane Assemblies in PEM Fuel Cells I. Electro-oxidation of H2 and H2/CO Mixtures on Pt-Based Gas-Diffusion Electrodes”, J. Electrochem. Soc., 146, 4031 (1999).
Dufour, A. U., “Fuel Cells — a New Contributor to Stationary Power”, J. Power Sources, 71, 19 (1998).
Fournier, J., G. Faubert, J. Y. Tilquin, R. cote, D. Guay, and J. P. Dodelet, “High-Performance, Low Pt Content Catalysts for the Electroreduction of Oxygen in Polymer-Electrolyte Fuel Cells”, J. Electrochem. Soc., 144, 145-154 (1997).
Gasteiger, H. A., N. M. Markovic, and P. N. Ross, Jr., “H2 and CO Electrooxidation on Well-Characterized Pt, Ru, and Pt-Ru. 1. Rotating Disk Electrode Studies of the Pure Gases Including Temperature Effects”, J. Phys. Chem., 99, 8290-8301 (1995).
Giorgi, L., A. Pozio, C. Bracchini, R. Giorgi, amd S. Turtu, “H2 and H2/CO oxidation mechanism on Pt/C, Ru/C and Pt-Ru/C electrocatalysts”, J. Appl. Electrochem., 31, 325-334 (2001).
Gloaguen, F., R. Andolfatto, and P. O. Durano, “Kinetic study of electrochemical reactions at catalyst-recast ionomer interfaces from thin active layer modeling”, J. Appl. Electrochem., 24, 863 (1994).
Gloaguen, F., P. Convert, S. Gamburzev, O. A. Velev, and S. Srinivasan, “An evaluation of the macro-homogeneous and agglomerate model for oxygen reduction in PEMFCs”, Electrochim. Acta, 43, 3767-3772 (1998).
Gojkovic, S. Lj., S. K. Zecevic, and R. F. Savinell, “O2 Reduction on an Ink-Type Rotating Disk Electrode Using Pt Supported on High-Area Carbons”, J. Electrochem. Soc., 145, 3713-3720 (1998).
Grgur, B. N., N. M. Markovic, and P. N. Ross, “The Electrooxidation of H2 , CO and H2/CO Mixtures on Carbon-Supported PtxMoy Alloy Catalysts”, J. Electrochem. Soc., 146, 1613-1619 (1999).
Haug, A. T., R. E. White, J. W. Weidner, W. Huang, S. Shi, N. Rana, S. Grunow, T. C. Stoner, and A. E. Kaloyeros, “Using Sputter Deposition to Increase CO Tolerance in a Proton-Exchange Membrane Fuel Cell”, J. Electrochem. Soc., 149, A868-A872 (2002).
Kangasniemi, K. H., D. A. Condit, and T. D. Jarvi, “Characterization of Vulcan Electrochemically Oxidized under Simulated PEM Fuel Cell Conditions”, J. Electrochem. Soc., 151, E125-E132 (2004).
Kinoshita, K., Electrochemical Oxygen Technology, John Wiley & Sons, New York, U.S.A. (1992).
Liu, W. J., B. L. Wu, and C. S. Cha, “Surface diffusion and the spillover of H-adatoms and oxygen-containing surface species on the surface of carbon black and Pt/C porous electrodes”, J. Electroanal. Chem., 476, 101-108 (1999).
Li, Z., “Progress and problems in hydrogen storage methods”, Renewable and Sustainable Energy Reviews, 9, 395-408 (2005).
Markovic, N. M., B. N. Grgur, and P. N. Ross, “Temperature-Dependent Hydrogen Electrochemistry on Platinum Low-Index Singal-Crystal Surface in Acid Solutions”, J. Phys. Chem. B., 101, 5405-5413 (1997).
Maruyama, J., M. Inaba, K. Katakura, Z. Ogumi, and Z. Takehara, “Influence of Nafion film on the kinetics of anodic hydrogen oxidation“, J. Electroanal. Chem., 447, 201-209 (1998).
McBreen, J., “Voltammetric Studies of Electrodes in Contact with ionomeric Membranes”, J. Electrochem. Soc., 132, 1112-1115 (1985).
McGovern, M. S., E. C. Garnett, C. Rice, R. I. Masel, and A. Wieckowski, “Effects of Nafion as a binding agent for unsupported nanoparticle catalysts”, J. Power Sources, 115, 35-39 (2003).
Metha, V., and J. S. Cooper, “Review and analysis of PEM fuel cell design and manufacturing”, J. Power Sources, 114, 32-53 (2003).
Mello, R. M. Q., and E. A. Ticianelli, “Kinetic study of the hydrogen oxidation reaction on platinum and Nafion covered platinum electrodes”, Electrochim. Acta, 42, 1031-1039 (1997).
Mukerjee, S., S. J. Lee, E. A. Ticianelli, J. McBreen, B. N. Grgur, N. M. Markovic, P. N. Ross, J. R. Giallombardo, and E. S. De Castro, “Investigation of Enhanced CO Tolerance in Proton Exchange Membrane Fuel Cells by Carbon Supported PtMo Alloy Ctalysts”, Electrochem. Solid-state Let., 2, 12 (1999).
Okada, T., J. Dale, Y. Ayato, O. A. Asbjornsen, M. Yuasa, and I. Sekine, “Unprecedented Effects of Impurity Cations on the Oxygen Reduction Kinetics at Platinum Electrodes Covered with Perfluorinated Ionomer”, Langmuir, 15, 8490-8496 (1999).
Okada, T., Y. Ayato, J. Dale, M. Yuasa, I. Sekine, and O. A. Asbjornsen, “Oxygen reduction kinetics at platinum electrode covered with perfluorinated ionomer in the presence of impurity cations Fe3+, Ni2+ and Cu2+”, Phys. Chem. Chem. Phys., 2, 3255-3261 (2000).
Okada, T., Y. Ayato, H. Satou, M. Yuasa, and I. Sekine, “The Effects of Impurity Cations on the Oxygen Reduction Kinetics at Platinum Electrodes Covered with Perfluorinated Ionomer”, J. Phys. Chem. B., 105, 6980-6986 (2001).
Okada, T., “Effects of ionic contaminants”, In: Vielstich, W., H. A. Gasteiger, and A. Lamm (ed), Handbook of Fuel Cells — Fundamentals, Technology and Applications, John Wiley & Sons, vol. 3, pp.627-646 (2003).
Passalacqua, E., F. Lufrano, G. Squadrito, A. Patti, and L. Giorgi, “Nafion content in the catalyst layer of polymer electrolyte fuel cells: effects on structure and performance”, Electrochim. Acta, 46, 799-805 (2001).
Paulus, U. A., Z. Veziridis, B. Schnyder, M. Kuhnke, G. G. Scherer, and A. Wokaun, “Fundamental investigation of catalyst utilization at the electrode/solid polymer electrolyte interface Part I. Development of a model system”, J. Electroanal. Chem., 541, 77-91 (2003).
Perez, J., E. R. Gonzalez, and E. A. Ticianelli, “Oxygen electrocatalysis on thin porous coating rotating platinum electrodes”, Electrochim. Acta., 44, 1329-1339 (1998).
Pozio, A., M. D. Francesco, A. Cemmi, F. Cardellini, and L. Giorgi, “Comparison of high surface Pt/C catalysts by cyclic voltammetry”, J. Power Sources, 105, 13-19 (2002).
Roen, L. M., C. H. Paik, and T. D. Jarvi, “Electrocatalytic Corrosion of Carbon Support in PEMFC Cathodes”, Electrochem. Solid-State Lett., 7, A19-A22 (2004).
Sasikumar, G., J. W. Ihm, and H. Ryu, “Optimum Nafion content in PEM fuel cell electrodes“, Electrochim. Acta, 50, 601-605 (2004).
Schmidt, T. J., H. A. Gasteiger, G. D. Stab, P. M. Urban, D. M. Kolb, and R. J. Behm, “Characterization of High-Surface-Area Electrocatalysts Using a Rotating Disk Electrode Configuration“, J. Electrochem. Soc., 145, 2354-2358 (1998).
Schmidt, T. J. and H. A. Gasteiger, and A. Lamm (ed), Handbook of Fuel Cells — Fundamentals, Technology and Applications, vol. 2, John Wiley & Sons, pp.316-333 (2003).
Shan, J., P. G. Pickup, “Characterization of polymer supported catalysts by cyclic voltammetry and rotating disk voltammetry”, Electrochim. Acta, 46, 119-125 (2000).
Takasu, Y., N. Ohashi, X. G. Zhang, Y. Murakami, H. Minagawa, S. Sato, and K. Yahikozawa, “Size Effects of Platinum Particles on The Electroreduction of Oxygen”, Electrochim. Acta, 41, 2595-2600 (1996).
Tamizhmani, G., J. P. Dodelet, and D. Guay, “Crystallite Size Effects of Carbon-Supported Platinum on Oxygen Reduction in Liquid Acids”, J. Electrochem. Soc., 143, 18-23 (1996).
Ticianelli, E. A., J. G. Beery, and S. Srinivasan, “Dependence of performance of solid polymer electrolyte fuel cells with low platinum loading on morphologic characteristics of the electrodes”, J. Appl. Electrochem., 21, 597 (1991).
Vielstich, W., H. A. Gasteiger, and A. Lamm, Handbook of Fuel Cells—Fundamentals, Technology and Application, John Wiley & Sons, England (2003).
Watanabe, M., H. Igarashi, and K. Yosioka, “An Experimental Prediction of The Oreoaration Condition of Nafion-coated Catalyst Layers for PEFCs”, Electrochim. Acta., 40, 329-334 (1995).
Watanabe, M., H. Uchida, Y. Seki, and M. Emori, “Self-Humidifying Polymer Electrolyte Membranes for Fuel Cells”, J. Electrochem. Soc., 143, 3847 (1996).
Wright, P. V., “Polymer electrolytes—the early days”, Electrochim. Acta., 43, 1137-1143 (1998).
Zecevic, S. K., J. S. Wainright, M. H. Litt, S. Lj. Gojkovic, and R. F. Savinell, “Kinetics of O2 Reduction on a Pt Electrode Covered with a Thin Film of Solid Polymer Electrolyte”, J. Electrochem. Soc., 144, 2973-2982 (1997).
Zeng, R., J. Pang, and H. Zhu, “Modification of a Nafion ion exchange membrane by a plasma polymerization process”, J. Electroanal. Chem., 490, 102-106 (2000).
Zook, L. A., and J. Leddy, “Density and Solubility of Nafion: Recast, Annealed, and Commercial Films”, Anal. Chem., 68, 3973-3976 (1996).
衣寶廉,黃朝榮,林修正,”燃料電池—原理與應用”,五南 (2005)
林仁斌,”氫氣在燃料電池白金觸媒上氧化反應之動力學硏究”,博士論文,國立台灣大學,台北,台灣 (2005) | zh_TW |