dc.relation.reference | Ammerman, C.N., and You, S.M., “Enhancing Small-Channel Convective Boiling Performance Using a Microporous Surface Coating,” Journal of Heat Transfer, Vol. 123, No. 5, pp. 976-983, 2001.
Bergles, A.E., “Enhancement of pool boiling,” International Journal of Refrigeration, Vol. 20, No. 8, pp. 545-551, 1997.
Bergles, A.E., and Kandlikar, S.G., “On the Nature of Critical Heat Flux in Microchannels,” Journal of Heat Transfer, Vol. 127, No. 1, pp. 101-107, 2005.
Bowers, M.B., and Mudawar, I., “High Flux Boiling in Low Flow Rate, Low Pressure Drop Mini-Channel and Micro-Channel Heat Sinks,” International Journal of Heat and Mass Transfer, Vol. 37, pp. 321-332, 1994.
Chang, J.Y., and You, S.M., “Boiling heat transfer phenomena from micro-porous and porous surfaces in saturated FC-72,” International Journal of Heat and Mass Transfer, Vol 40, No. 18, pp. 4437-4447, 1997.
Chu, R.C., “Thermal Management Roadmap Cooling Electronic Products from Handheld Device to Supercomputers,” MIT Rohsenow Symposium, May, 2003.
Cieslinski, J.T., “Nucleate pool boiling on porous metallic coatings,” Experimental Thermal and Fluid Science, Vol 25, No. 7, pp. 557-564, 2002.
Collier, J.G., and Thome, J.R., “Convective Boiling and Condensation,” 3rd Edition, Oxford University Press, Oxford, UK, 1994.
Furberg, R., Li, S., Palm, B., Toprak, M., and Muhammed, M., “Dendritically ordered nano-particles in a micro-porous structure for enhanced boiling,” 13th International Heat Transfer Conference, NAN-07, 2006.
Griffith P., and Wallis J.D., “The role of surface conditions in nucleate boiling,” Chemical Engineering Progress Symposium Series, Vol. 56, No. 30, pp. 49-63, 1960.
Hwang, G.S., and Kaviany, M., “Critical heat flux in thin, uniform particle coatings,” International Journal of Heat and Mass Transfer, Vol.49, No. 5-6, pp. 844-849, 2006.
Incropera, R.P., and DeWitt, D. P., “Fundamentals of Heat and Mass Transfer,” 5th Edition, John Wiley & Sons, NY, 2002.
Jones, R., Pate, D., and Bhavnani, S., “Phase Change Thermal Transport in Etched Silicon Microchannel Heat Sinks,” 13th International Heat Transfer Conference, No. MPH-28, 2006.
Kandlikar, S.G., “Microchannels and Minichannels-History, Terminology,
Classifiation and Current Research Needs,” International Conference on Microchannels and Minichannels, April 24-25, No. ICMM2003-1070, 2003.
Kandlikar, S.G., Kuan, W.K., Willistein, D.A., and Borrelli, J., “Stabilization of Flow Boiling an Microchannels Using Pressure Drop Elements and Fabricated Nucleation Sites,” Journal of Heat Transfer, Vol. 128, No. 4, pp. 389-396, 2006.
Kew, P.A., and Cornwell, K., “Correlations for Prediction of Boiling Heat Transfer in Small Diameter Channels,” Applied Thermal Engineering, Vol. 17, No. 8–10, pp. 705–715, 1997.
Kosar, A., Kuo, C.J., and Peles, Y., “Boiling Heat Transfer in Rectangular Microchannels with Reentrant Cavities,” International Journal of Heat and Mass Transfer, Vol. 48, No. 23-24, pp. 4867-4886, 2005.
Lee, J., and Mudawar, I., “Two-Phase Flow in High-Heat-Flux Microchannel Heat Sink for Refrigeration Cooling Applications: Part II-Heat Transfer Characteristics,” International Journal of Heat and Mass Transfer, Vol. 48, pp. 941–955, 2005.
Lockhart, R.W., and Martinelli, R.C., “Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes,” Chemical Engineering Progress, Vol. 45, No. 1, pp. 39-48, 1949.
Mehendal, S.S., Jacobi, A.M., and Shah, R.K., “Fluid Flow and Heat Transfer at Micro- and Meso-Scales with Application to Heat Exchanger Design, Applied Mechanics Reviews, Vol.53, No.7, pp.175–193, 2000.
Mudawar, I., “Assessment of High-Heat-Flux Thermal Management Schemes,” IEEE Transactions on Components and Packaging Technologies, Vol. 24, No. 2, pp. 122-141, 2001.
Peng, X.F., and Wang, B.X., “Forced Convection and Flow Boiling Heat Transfer for Liquid Flowing through Microchannels,” International Journal of Heat and Mass Transfer, Vol. 36, No. 14, pp. 3421-3427, 1993.
Qu, W., and Mudawar, I., “Flow Boiling Heat Transfer in Two-phase Micro-Channel Heat Sinks-I: Experimental Investigation and Assessment of Correlation Methods, International Journal of Heat and Mass Transfer, Vol. 46, pp.2755–2771, 2003.
Ravigururajan, T.S., “Impact of Channel Geometry on Two-phase Flow Heat Transfer Characteristics of Refrigerants in Microchannel Heat Exchangers,” Journal of Heat Transfer, Vol. 120, pp. 485–491, 1998.
Ribatski, G., and Thome, J.R., “Nucleate boiling heat transfer of R134a on enhanced tubes,” Applied Thermal Engineering, Vol. 26, No. 10, pp. 1018-1031, 2006.
Scurlock, R.G., “Enhanced Boiling Heat Transfer Surfaces,” Cryogenics, Vol. 35, No. 4, pp. 233-237, 1995.
Steinke, M.E., and Kandlikar, S.G., “An Experimental Investigation of Flow Boiling Characteristics of Water in Parallel Microchannels,” Journal of Heat Transfer, Vol. 126, No. 4, pp. 518-526, 2004.
Tehver, J., “Influence of Porous Coating on the Boiling Burnout Heat Flux,” Recent Advances in Heat Transfer, pp. 231-242, 1992.
Thome, J.R., “Enhanced boiling heat transfer,” Hemisphere Publisher Corporation, New York, USA, 1990.
Thome, J.R., “Boiling in Microchannels: a Review of Experiment and Theory,” International Journal of Heat and Fluid Flow, Vol. 25, pp. 128–139, 2004.
Tuckerman, D.B., and Pease, R.F.W., “High-Performance Heat Sinking for VLSI,” IEEE Electronic Device Letters, EDL-2, pp.126-129, 1981.
Wambsganss, M.W., France, D.M., Jendrzejczyk, J.A., and Tran, T.N, “Boiling Heat Transfer in a Horizontal Small Diameter Tube,” Journal of Heat Transfer, Vol. 115, pp. 963–972, 1993.
Wang, B.X., and Peng, X.F., “Experimental investigation on liquid forced- convection heat transfer through microchannels,” International Journal of Heat and Mass Transfer, Vol. 37, No. Suppl 1, pp. 73-82, 1994.
Warrier, G.R., Dhir, V.K., and Momoda, L.A., “Heat Transfer and Pressure Drop in Narrow Rectangular Channels,” Experimental Thermal and Fluid Science,” Vol. 26, pp. 53–64, 2002.
Webb, R.L., “Nucleate boiling on porous coated surfaces,” Heat Transfer Engineering, Vol. 4, No. 3-4, pp. 71-82, 1983.
Webb, R.L., “Next Generation Devices for Electronic Cooling With Heat Rejection to Air,” Journal of Heat Transfer, Vol. 127, No. 1, pp. 2-10, 2005a.
Webb, R.L., “Principles of enhanced heat transfer,” 2nd ED, John Wiley & Sons, Inc., New York, 2005b.
Wojtan, L., Revellin, R., and Thome, J.R., “Investigation of Saturated Critical Heat Flux in a Single, Uniformly Heated Microchannel,” Experimental Thermal and Fluid Science, Vol. 30, No. 8, pp. 765-774, 2006.
Wu, W., Du, J. H., Hu, X. J., and Wang, B. X., “Pool boiling heat transfer and simplified one-dimensional model for prediction on coated porous surfaces with vapor channels,” International Journal of Heat and Mass Transfer, Vol. 45, pp. 1117-1125, 2002.
Zhang, L., Wang, E.N., Koo, J.M., Jiang, L., Goodson, K.E., Santiago, J.G., and Kenny, T.W., “Enhanced Nucleate Boiling in Microchannels,” Proceedings of the IEEE Micro Electro Mechanical Systems (MEMS), pp. 89-92, 2002.
Zivi, S.M., “Estimation of Steady-State Stem Void-Fraction by means of the Principle of Minimum Entropy Production,” Journal of Heat Transfer, Vol. 86, pp.247–252, 1964. | en |