dc.relation.reference | [1]Chu, R.C., “Thermal Management Roadmap Cooling Electronic Products from Handheld Device to Supercomputers,” MIT Rohsenow Symposium, May, 2003.
[2]http://en.wikipedia.org/wiki/Heat_pipe, Wikipedia Online Encyclopedia.
[3]Maidanik, Y. F., Vershinin, S., Kholodov, V., and Dolgirev, J., “Heat Transfer Apparatus,” U.S. Patent, No. 4515209, 1985.
[4]Prasher, R., and Payne, D., “Loop Heat Pipe for Mobile Computers,” U.S. Patent, No. 6381135, 2002.
[5]Maydanik, Y.F., Vershinin, S.V., Korukov, M.A., and Ochterbeck, J.M., “Miniature Loop Heat Pipes – a Promising Means for Cooling Electronics,” IEEE Transactions on Components and Packaging Technologies, Vol. 28, No. 2, pp. 290-296, 2005
[6]Maidanik, Y. F., Fershtater, Y. G., and Solodovnik, N. N., “Loop Heat Pipes: Design, Investigation, Prospects of Use in Aerospace Technics,” SAE Paper No.941185, 1994.
[7]Dickey, J. T., and Peterson G. P., “Experimental and Analytical Investigation of a Capillary Pumped Loop,” Journal of Thermophysics and Heat Transfer, Vol. 8, No. 3, pp.602-607, 1994.
[8]Gernert, N. J., Baldassarre, G. J., and Gottschlich, J. M., “Fine Pore Loop Heat Pipe Wick Structure Development,” SAE Paper No.961319, 1996.
[9]Ku, J., “Operating Characteristics of Loop Heat Pipes,” SAE Paper No.1999-01-2007, 1999.
[10]Kaya, T., and Hoang, T. T., “Mathematical Modeling of Loop Heat Pipes and Experimental Validation,” Journal of Thermophysics and Heat Transfer, Vol. 3, No. 3, pp.314-320, 1999.
[11]Kaya, T., and Ku, J., “A Parametric Study of Performance Characteristics of Loop Heat Pipe,” SAE Paper No.1999-01-2006, 1999.
[12]Ku, J., Ottenstein, L., Roger, P., and Cheung, K., “Capillary Limit in a Loop Heat Pipe with a Single Evaporator,” SAE Paper No.2002-01-2502, 2002.
[13]Kim, J., and Golliher, E., “Steady State Model of a Micro Loop Heat Pipe,” 18th Annual IEEE Symposium: Semiconductor Thermal Measurement and Management, 2002.
[14]Kobayashi, T., Ogushi, T., Haga, S., Ozaki, E., and Fujii, M., “Heat Transfer Performance of Flexible Looped Heat Pipe using R134a as a Working Fluid : Proposal for a Method to Predict the Maximum Heat Transfer Rate of FLHP,” Heat Transfer-Asian Research, Vol. 32, No. 4, pp. 306-318, 2003.
[15]Kaya, T., and Ku, J., “Thermal Operation Characteristics of a Small-Loop Heat Pipe,” Journal of Thermophysics and Heat Transfer, Vol. 17, No. 4, pp. 464-470, 2003.
[16]Hoang, T. T., and Ku, J., “Heat and Mass Transfer in Loop Heat Pipes”, ASME Heat Transfer Conference, July, 2003.
[17]Hoang, T. T., O'Connell, T., Ku, J., Butler, D., and Swanson, T., “Miniature Loop Heat Pipes for Electronic Cooling,” International Electronic Packaging Technical Conference, July, 2003.
[18]Ghajar, M., Darabi, J., and Crews, N. Jr., “A Hybrid CFD-Mathematical Model for Simulation of a MEMS Loop Heat Pipe for Electronics Cooling Applications,” Journal of Micromechanics and Microengineering, Vol. 15, No. 2, pp. 313-321, 2004.
[19]Ghajar, M., Darabi, J., “Numerical Modeling of Evaporator Surface Temperature of a Micro Loop Heat Pipe at Steady-State Condition,” Journal of Micromechanics and Microengineering, Vol. 15, No.10, pp. 1963-1971, 2005.
[20]Bombled, Q., Renaud, J., Lybaert, V., Feldheim, P., Dupont, V., and Van Oost, S., “Experimental and Numerical Characterization of a Loop Heat Pipe for Space Applications,” 7th National Congress on Theoretical and Applied Mechanics, Belgium, 2006.
[21]Chernysheva, M. A., Vershinin, S. V., and Maydanik, Yu. F., “Operating Temperature and Distribution of a Working Fluid in LHP,” International Journal of Heat and Mass Transfer, Vol. 50, No. 13-14, pp. 2704-2713, 2007.
[22]Vershinin, S. V., and Maydanik, Yu. F., “Hysteresis Phenomena in Loop Heat Pipes,” Applied Thermal Engineering, Vol. 27, No. 5-6, pp. 962-968, 2007.
[23]Launay, S., and Sartre, V., and Bonjour, J., “Parametric Analysis of Loop Heat Pipe Operation: a Literature Review,” International Journal of Thermal Sciences, Vol. 46, No. 7, pp. 621-636, 2007.
[24]Incropera, R. P., and DeWitt, D. P., “Fundamentals of Heat and Mass Transfer,” 4th Edition, John Wiley & Sons, 1996.
[25]Holman, J. P., “Heat Transfer,” 8th Edition, McGraw-Hill, New York, 2000.
[26]Wallis, G. B., “One-Dimension Two-Phase Flow,” McGraw-Hill, New York, 1969
[27]Lockhart, R. W., and Martinelli, R. C., “Proposed Correlation of Data for Isothermal Two-Phase, Two-Component Flow in Pipes,” Chemical Engineering Progress, Vol. 45, No. 1, pp. 39-48, 1949.
[28]Shah, M. M., “A General Correlation for Heat Transfer during Film Condensation inside Pipes,” International Journal of Heat and Mass Transfer, Vol. 22, pp.547-556, 1979.
[29]Chi, S. W., “Heat Pipe Theory and Practice,” McGraw-Hill, New York, 1976.
[30]Chuang, P.-Y.A., “An Improved Steady-State Model Of Loop Heat Pipes Based on Experimental and Theoretical Analyses, Ph.D. Thesis, The Pennsylvania State University, USA, 2003.
[31]Wang, Z., “On the Steady-State Operation of Loop Heat Pipe Evaporators: Fundamentals and Modeling,” Ph.D. Thesis, Clemson University, USA, 2005.
[32]Gorring, R. L., and Churchill, S. W., “Thermal Conductivity of Heterogeneous Materials,” Chemical Engineering Progress, Vol. 57, pp.53 – 59, 1961.
[33]“Standard Test Method for Maximum Pore Diameter and Permeability of Rigid Porous Filters for Laboratory Use,” ASTM E128-61, 1981.
[34]Tracey, V. A., “Pressing and Sintering of Nickel Powders,” The International Journal of Powder Metallurgy & Powder Technology, Vol. 20, No. 4, pp. 281 -285, 1984.
[35]http://webbook.nist.gov/chemistry/, NIST Standard Reference Database No. 69, June-2005 Release. | en |