dc.relation.reference | Arena, U., A. Cammarota and M. L. Mastellone, "The Influence of Operating Parameters on The Behavior of A Small Diameter L-valve", in Fluidization IX, L. S. Fan and T. M. Knowlton (Eds.), pp. 365-372, Engineering Foundation, New York (1998a).
Arena, U., C. B. Langeli and A. Cammarota, "L-valve Behaviour With Solid of Different Size and Density", Powder Technol., 98, 231-240 (1998b).
Daous, M. A. and A. A. Al-Zahrani, "Modeling Solids and Gas Flow Through an L-valve", Powder Technol., 99, 86-89 (1998).
Geldart, D., "Types of Gas Fluidization", Powder Technol., 7, 285-292 (1973).
Geldart, D. and P. Jones, "The Behaviour of L-valves With Granular Powders", Powder Technol., 67, 163-174 (1991).
Karri, S. B. R. and T. M. Knowlton, "Comparison of Group A and Group B Solids Flow in Underflow Standpipes", in Fluidization VII, O. E. Potter and D. J. Nicklin (Eds.), pp. 345-352, Engineering Foundation, New York (1992).
Knowlton, T. M., "Nonmechanical Solids Feed and Recycle Devices For Circulating Fluidized Beds", in Circulating Fluidized Bed Technology II, P. Basu and J. F. Large (Eds.), pp. 31-41, Pergamon, Oxford (1988).
Knowlton, T. M., "Standpipes and Return Systems", in Circulating Fluidized Beds, J. Grace, A. A. Avidan and T. M. Knowlton (Eds.), Chap. 7, pp. 214-260, Blackie Academic and Professional, London (1997).
Knowlton, T. M. and I. Hirsan, "L-valves Characterized for Solids Flow", Hydrocarbon Proc., 57, 149-156 (1978).
Knowlton, T. M., “Solid Transfer in Fluidized Systems”, in Gas Fluidization Technology, D. Geldart (Eds.), Chap. 12, pp. 341-414, Wiley, New York (1986).
Knowlton, T. M., “Standpipes and Nonmechanical valves”, in Handbook of Fluidization and Fluid-Particle systems, W. C. Yang (Eds.), Chap. 21, pp. 571-597, Marcel Dekker, New York (2003).
Kunii, D. and O. Levenspiel, "Fluidization Engineering", Butterworth - Heinemann, Boston, MA, USA (1991).
Leung, L. S. and P. J. Hones, "Flow of Gas-Solid Mixtures in Standpipes. A Review.", Powder Technol., 20, 145-160 (1978).
Loung, P. H. and S. C. Bhattacharya, "A Study of Solid Circulation Rate in A Circulating Fluidized Bed", Int. J. Energy Research, 17, 479-490 (1993).
Molodtsof, Y., A. Ould-Dris and J. F. Large, "A Classification and Design Method For Moving Bed Flow in Pipes", Powder Technol., 87, 49-57 (1996).
Ozawa, M., S. Tobita, T. Mii, Y. Tomoyasu, T. Takebayashi and K. Suzuki, "Flow Pattern and Flow Behavior of Solid Particles in L-valve", in Circulating Fluidized Bed Technology III, P. Basu, M. Horio and M. Hasatani (Eds.), pp. 615-620, Pergamon, Oxford (1991).
Petter, O. E. and M. Simpson, "L-valves in A Multi-Stage Gas-Solids Countercurrent Fluidized Bed System", in Fluidization IX, L. S. Fan and T. M. Knowlton (Eds.), pp. 373-380, Engineering Foundation, New York (1998).
Rhodes, M. and H. Cheng, "Operation of An L-valve in A Circulating Fluidized Bed of Fine Solids", in Circulating Fluidized Bed Technology IV, A. A. Avidan (Eds.), pp. 240-245, AIChE, New York (1993).
Rudolph, V., Y. O. Chong and D. J. Nicklin, "Standpipe Modelling for Circulating Fluidized Beds", in Circulating Fluidized Bed Technologh III, P. Basu, M. Horio and M. Hasatani (Eds.), pp. 49-64, Pergamon, Oxford (1991).
Smolders, K. and J. Baeyens, "The Operation of L-valves to Control Standpipe Flow", Advanced Powder Technol., 6 (3), 163-176 (1995).
Tong, H., H. Li, X. Lu and Q. Zheng, "Hydrodynamic Modeling of The L-valve", Powder Technol., 129, 8-14 (2003).
Yang, W. C. and T. M. Knowlton, "L-valve Equations", Powder Technol., 77, 49-54 (1993).
Zheng, Y. Q., Z. W. Ma and A. B. Wang, "Experimental Study of The Flow Pattern and Flow Behaviour of Gas-Solid Two Phase Flow in L-valve", in Circulating Fluidized Bed Technology IV, A. A. Avidan (Eds.), pp. 246-252, AIChE, New York (1993).
胡慶元, 景山, 王金福, 金涌, "L閥在氣力輸送中的應用", 化學反應工程與工藝, 17, 3, 244-248 (2001).
黃文迪, 許國良, 李宏順, 康忠新, "L閥控制物料循環的數學模型及其應用", 華中理工大學學報, 23, 4, 100-104 (1995).
蕭世梁, "B類粒子於快速流體化床中之軸向空隙度分布", 化工系碩士論文, 國立台灣大學, 台北, 台灣 (1993).
陳成慶, 呂維明, 呂理平, "單元操作實驗" (第四版), 文京圖書有限公司, 台北, 台灣 (1984). | zh_TW |