dc.description.abstract | The thesis proposes a novel design and optimal driving current wave for a brushless DC wheel-motor. First, we obtain the realization of current and back EMF waveform from the torque equation of motor constructed by energy method. The wheel motor has a maximum torque as the current and the back EMF waveform are proportional, i.e., the optimal current waveform follows the back EMF waveform. Second, we establish a 3-D model by the finite element analysis software, and obtain the results of simulation of the back EMF waveform. In the 3-D finite element analysis model, we decompose the back EMF waveform into different order of partial sums to analyze the corresponding torque and torque ripple. Then, the best current waveform is determined. Finally, we fabricate a prototype for the wheel motor and drive it with square, sinusoidal, and optimal current waveforms to test the wheel-motor’s performance.
It is shown by experiment that the back EMF waveform is similar to that obtained by finite element analysis, which reveals that the wheel motor must produce satisfactory torque. However, the torque from experiments reduces about 20% because of the malfunction of encoder signals. More improvement of the wheel motor is to expected before the implementation on a passenger car. | en |
dc.relation.reference | [1]D.C. Hanselman, Brushless Permanent-Magnet Motor Design, McGraw-Hill, New York, 1994.
[2]V. Ostovic, Computer-aided Analysis of Electric Machines, Prentice Hall, New York, 1994.
[3]張錚輝,”直接驅動車輪馬達之分析及最佳化設計”,國立台灣大學機械工程研究所碩士論文,89年6月。
[4]莊璫旭,”電動汽車直驅式軸向磁通永磁直流無刷馬達最佳化設計”,國立台灣大學機械工程學研究所碩士論文,93年6月。
[5]S.M.N. Hasan, Sikyung Kim, I. Husain,”Power Electronic Interface and Motor Control for a Fuel Cell Electric Vehicle,” Applied Power Electronics Conference and Exposition, 2004. APEC '04. Nineteenth Annual IEEE,Vol. 2, pp.1171–1177, 2004.
[6]Patterson, D. , Spee, R. ,”The design and development of an axial flux permanent magnet brushless DC motor for wheel drive in a solar powered vehicle,” Industry Applications, IEEE Transactions ,vol.31,pp. 1054-1061. Issue 5, Sept.-Oct. 1995.
[7]劉至浩,”新型四相車輪馬達驅動性能提昇的研究”,國立台灣大學機械工程學研究所碩士論文,93年6月。
[8]魏道炎,”直流無刷馬達驅動技術之研究”,國立台灣大學機械工程研究所碩士論文,90年6月。
[9]王鴻年,”電動機車馬達驅動控制器之研製”,國立台灣大學機械工程學研究所碩士論文,88年6月。
[10]吳尚緯,”四相車輪馬達最佳驅動波形設計”,國立台灣大學機械工程學研究所碩士論文,90年6月。
[11]陳敬奇,”電動車無刷軸向磁通車輪馬達之數位控制器的研製與弱磁控制的探討”,國立台灣大學機械工程學研究所碩士論文,92年6月。
[12]C.I. Kang, I.J. Ha,”An efficient torque control altorithm for BLDCM with a general shape of back EMF,” Power Electronics Specialists Conference, 1993. PESC’93 Record, 24th Annual IEEE, pp. 451-457,20-24 June 1993.
[13]T.J.E. Miller , R. Rabinovici,”Back-EMF waveforms and core losses in brushless DC motors,” IEE Proceedings- Electric Power Applications, Volume:141 , Issue:3 , pp. 144-154,May 1994.
[14]Joon-Ho Lee, Dong-Hun Kim, and Il-Han Park, “Minimization of higher back-EMF harmonics in permanent magnet motor using shape design sensitivity with B-spline parameterization,” IEEE Transactions ,vol. 39, pp. 1269-1272, May 2003.
[15]E. Favre, L. Cardoletti, and M. Jufer, ”Permanent-magnet synchronous motors: acomprehensive approach to cogging torque suppression,” Computers in Power Electronics, 2000. COMPEL 2000. The 7th Workshop on , pp. 217-220,16-18 July 2000.
[16]劉建章,”頻率適應控制技術及其應用於光碟機碟片面振與偏擺之抑制”,國立台灣大學機械工程研究所博士論文,93年6月。
[17]王燦鎮,”電動機車能源管理與電子換檔技術研發”,國立台灣大學機械工程學研究所碩士論文,93年6月。
[18]J.P. Holman,Heat Transfer, McGraw-Hill, New York, 1997.
[19]IXYS, MOSFET IXTK 120N25P Datasheet.
[20]太陽能燃料電池混合動力車多相車輪馬達動力系統性能提昇技術研發,93年8月。 | zh_TW |