dc.relation.reference | 參考文獻
1. Haper, D. R. and Brown, W. B., "Mathematical Equations for Heat Conduction in the Fins if Air Cooled Engines "NACA Report No.158, 1922.
2. Murray, M. N., "Heat Transfer through an Annular Disk or Fin of Uniform Thickness," Trans. ASME, J. Applied Mech., 60, A78, 1938.
3. F. P. Incropera, "Liquid Immersion Cooling of Electronic Components," Heat Transfer in Electronic and Microelectronic Equipment, A. E. Bergles (ed.), Washington, D.C.: Hemisphere Publishing Corporation, pp. 407-444, 1990.
4. W. Nakayama and A. E. Bergles, "Cooling of Electronic Component: Past, Present and Future," Heat Transfer in Electronic and Microelectronic Equipment, A. E. Bergles (ed.), Washington, D.C.: Hemisphere Publishing Corporation, pp. 3-39, 1990.
5. A. Bar-Cohen, "Thermal Management Electronic Components with Dielectric Liquids," International Journal of JSME, Ser. B, Vol. 16, No. 1, pp. 1-25, 1993.
6. Yoshihiro Kondo, "A Silent Liquid Cooing System for a Notebook PC," 新一代電子散熱技術研討會,3-1∼3-8頁,民國九十二年三月(2003).
7. Osamu Suzuki, "Advanced Liquid-Cooling Technologies," 新一代電子散熱技術研討會,4-1∼4-12頁,民國九十二年三月(2003).
8. R. S. Gaugler, "Heat Transfer Devices," U.S. Patent, Patent No. 2,350,348, 1944.
9. G. M. Grover, "Evaporation-Condensation Heat Transfer Device," U.S. Patent, Patent No. 3,229,759, 1963.
10. G. M. Grover, T. P. Cotter, and G. F. Erikson, "Structures of Very High Thermal Conductivity,"Journal Application Physicals (35), pp. 1190-1191, 1964.
11. L FRATELLI, R. MANZO, G GlANNlNl, “ Testing of integrated XGBT module heat-pipe cooler system” , 2004 35th Annual IEEE Power Electronics Speciolisrs Conference, pp.4516-4521.
12. http://www.fujikura.co.jp/news/0310/enews2.html
13. http://www.thermacore.com/papers.htm
14. Jentung Ku,” Operating Characteristics of Loop Heat Pipes”, 29th International Conference on Environmental System, July 12-15, 1999, pp.33-40, Denver Colorado.
15. Jane Baumann & Brent Cullimore, Jay Ambrose, Eva Buchan, Boris Yendler,” A Methodology for Enveloping Reliable Start-Up of LHPs”, American Institute of Aeronautics and Astronautics, 2000, pp.1-9.
16. Yu. F. Maydanik, "Loop Heat Pipes – Development and Application," the SEMINAR of Department of Mechanical Engineering National Taiwan University, Oct. 2003.
17. J.H. Ambrose, A.R. Field, H.R. Holmes,” A Pumped Heat Pipe Cold Plate for High-Flux Applications”, Experimental Thermal and Fluid Science, 1995, pp.156-162.
18. D. Khrustalev, A. Faghri,” Estimation of the maximum heat flux in the inverted meniscus type evaporator of a flat miniature heat pipe”, Int. J. Heat Mass Transfer, Vol.39, No.9, pp.1899-1909, 1999.
19. Z. Jon Zuo and Peter M. Dussinger, "Heat Pipe Vapor Chamber Cold Plate Modeling, Fabrication, and Testing," Proceedings of the 1998 ASME International Mechanical Engineering Congress and Exposition, pp. 281-286, 2000.
20. Jung-Cheng Lin, Jiunn-Chi Wu, Chun-Ta Yen, Chien-Yuh Yang,” Fabrication and Performance Analysis of Metallic Micro Heat Spreader for CPU”, 13th International Heat Pipe Conference(13th IHPC), Shanghai, China, September 21-25, 2004.
21. Yimin Xuan, Yuping Hong, Qiang Li,” Investigation on transient behaviors of flat plate heat pipes”, Experimental Thermal and Fluid Science 28(2004) 249~255.
22. Masataka Mochizuki, Thang Nguyen, Koichi Mashiko, Yuji Staito, Tien Nguyen, Vijit Wuttijumnong, and Xiaoping Wu,” Practical Application of Heat Pipe and Vapor Chamber for Cooling High Performance Personal Computer”, 13th International Heat Pipe Conference(13th IHPC), Shanghai, China, September 21-25, 2004.
23. http://www.thermacore.com/
24. J.C. Wang, S.J. Lin, S.L. Chen and W.S. Lee, “ Charge and Discharge Characteristics of a Thermal Energy Storage Device”, Experimental Heat Transfer, Vol.18, pp. 45-60, 2005.
25. J. G. Reed and C. L. Tien, "Modeling of the Two Phase Closed Thermosyphon," Transactions of the ASME Journal of Heat Transfer, Vol. 109, pp. 722-730, 1987.
26. A. Niro and G. P. Beretta, "Boiling Regimes in a Closed Two-Phase Thermosyphon," International Journal of Heat and Mass Transfer, Vol. 33, No. 10, pp. 2099-2110, 1990.
27. Sunil S. Murthy, Yogendra K. Joshi, and Wataru Nakayama, "Single Chamber Compact Thermosyphons with Micro-Fabricated Components," Proceedings of the 7th Intersociety Conference on Thermal and Thermomechanical Phenomenon in Electronic Systems (I-Them), Las Vegas, NV, May 2000.
28. Ralph. L. Webb and Shinobu Yamauchi, "The Result on a Thermo-Syphon Concept to High-Power Cool Desktop Computers and Servers," Proc. of the 18th IEEE SEMI-THERM Symposium, pp. 151-158, 2002.
29. R. C. Chu, R. E. Simons, and G. M. Chrysler, "Experimental Investigation of an Enhanced Thermosyphon Heat Loop for Cooling of a High Performance Electronics Module," 15th IEEE Semi-ThermTM Symposium, 1999.
30. Chandrashekhar Ramaswamy, Yogendra K. Joshi, and Wataru Nakayama, "Thermal Performance of a Compact Two-Phase Thermosyphon: Response to Evaporator Confinement and Transient Loads," Journal of Enhanced Heat Transfer, Vol. 6, No. 2-4, pp. 279-288, 1999.
31. Chandrashekhar Ramaswamy, Yogendra K. Joshi, Wataru. Nakayama, and William B. Johnson, "Combined Effects of Sub-Cooling and Operating Pressure on the Performance of a Two-Chamber Thermosyphon," IEEE Transactions on Components and Packaging Technologies, Vol. 23, No. 1, Mar. 2000.
32. S. I. Haider, Yogendra K. Joshi, and Wataru Nakayama, "A Natural Circulation Model of the Closed Loop, Two-Phase Thermosyphon for Electrics Cooling," Journal of Heat Transfer, Vol. 124, pp. 881-890, Oct. 2002.
33. Aniruddha Pal, Yogendra K. Joshi, Monem H., Chandrakant D. Patel, and Todd M. Wenger, "Design and Performance Evaluation of a Compact Thermosyphon," IEEE Transactions on Components and Packaging Technologies, Vol. 25, No. 4, Dec. 2002.
34. Lang Yuan, Yogendra K. Joshi, and Wataru Nakayama, "Effect of Condenser Location and Imposed Circulation on the Performance of a Compact Two-Phase Thermosyphon," Microscale Thermophysical Engineering, Vol. 7, pp. 163-179, 2003.
35. Z. N. Ma, C. B. Sobhan, T. N. Wong, and X. Y. Huang, "Experimental Investigations on a Closed Mini Thermosyphon," IEEE/CPMT Electronics Packaging Technology Conference, 1998.
36. Min-Kyun NA, Jin-Seok Jeon, Ho-Young Kwak, and Sang-Sig Nam, "Experimental Study on Closed-Loop Two-Phase Thermosyphon Devices for Cooling MCMs," Journal of Heat Transfer Engineering, Vol. 22, pp. 29-39, 2001.
37. Dmitry Khrustalev, "Loop Thermosyphons for Cooling of Electronics," Proc. of the 18th IEEE SEMI-THERM Symposium, pp. 145-150, 2002.
38. Rahmatollah Khodabandeh, and Björn Palm, "Influence of System Pressure on the Boiling Heat Transfer Coefficient in a Closed Two-Phase Thermosyphon Loop," International Journal of Thermal Sciences, Vol. 41, pp. 619-624, 2002.
39. W. M. Rohsenow, "A Method of Correlating Heat Transfer Data for Surface Boiling of Liquids," Trans. ASME, Vol. 74, pp. 969-975, 1952.
40. C. Pais and R. L. Webb, "Literature Survey of Pool Boiling on Enhanced Surfaces," ASHRAE Transactions 97/1: Research, pp.79-89, 1991.
41. Wade R. McGillis, John S. Fitch, William R. Hamburgen, and Van P. Carey, "Pool Boiling Enhancement Techniques for Water at Low Pressure," The Western Research Laboratory (WRL) Research Report 90/9, 1990.
42. Wade R. McGillis, John S. Fitch, William R. Hamburgen, and Van P. Carey, "Pool Boiling on Small Heat Dissipating Elements in Water at Subatmospheric Pressure," The Western Research Laboratory (WRL) Research Report 91/7, 1991.
43. 陳聖謙,「迴路式熱虹吸管之薄膜蒸發研究」,碩士論文,國立台灣大學機械工程學研究所,民國95年。
44. J.C. Wang and S.L. Chen, “Experimental Investigations of Thermal Resistance of a Heat Sink with Horizontal Embedded Heat Pipes.” International Communication Heat and Mass Transfer. (Accepted)
45. W. M. Rohsenow, J. P. Hartnett, and Y. I. Cho, Handbook of Heat Transfer 3rd ed., McGraw-Hill, 1998.
46. 周文豪,「嵌入式熱管散熱模組之數值分析與實驗測試」,碩士論文,國立台灣大學機械工程學研究所,民國94年7月(2005)。
47. 康仁豪,「嵌入式熱管鰭片散熱模組之研究」,碩士論文,國立台灣大學機械工程學研究所,民國94年。
48. Van P. Carey, Liquid-vapor phase-change phenomena : an introduction to the thermophysics of vaporization and condensation processes in heat transfer equipment, Washington, D.C. : Hemisphere Pub. Corp., c1992.
49. W. Nusselt, "The Condensation of Steam on Cooled Surfaces," Z. d. Ver. Deut. Ing., 60, pp. 541-546, 569-575, 1916. | zh_TW |