https://scholars.lib.ntu.edu.tw/handle/123456789/62816
標題: | 複合式冷卻與潤滑用於Ti-6Al-4V車削之研究 Study on Machinability in turning of Ti-6Al-4V with hybrid cooling and lubrication |
作者: | 劉得杏 Liou, Der-Hsing |
關鍵字: | Ti-6Al-4V;切削性;微量噴霧;熱管;machinability;MQL;heat pipe | 公開日期: | 2005 | 摘要: | 本文主要在於探討使用微量噴霧(MQL)以及不同的冷卻與潤滑方式對 於車削Ti-6Al-4V 的切削性影響。文中先從刀具磨耗、切削力和表面粗度 結果的分析,歸納出最適合的噴霧參數設定。再比較切削時以微量噴霧配 合熱管置於刀片底端的方式、以及單獨使用微量噴霧、熱管和一般濕切 削,觀察刀具磨耗、切削力、刀具溫度、表面粗度及切屑,以獲得切削 Ti-6Al-4V 最適當的冷卻與潤滑方式。 實驗結果發現微量噴霧最適當的組成為以水基(20%)切削液配合 20ml/hr 的流量最可以有效降低刀具磨耗。不同潤滑與冷卻方式皆以微量噴 霧配合熱管最能有效降低刀具磨耗。切削速度可以從一般建議的 50-70m/min 提升至90m/min,因此預期可以改善切削Ti-6Al-4V 鈦合金的 效率。 Titanium alloy is well known as one of the typical difficult-to-cut materials. This thesis focuses on the effect of various cooling and lubricating methods on machinability in turning Ti-6Al-4V titanium alloy. The appropriate cutting fluid and its associated flow rate of the minimum quantity lubrication (MQL) applied in the cutting process are determined first. Thereafter, four types of cooling and lubrication methods during cutting are compared. They are machining with the MQL technique, machining with flooded cutting fluid, machining with a heat pipe embedded beneath the insert for heat removal, and machining with the MQL technique together with the assistance of a heat pipe. The most appropriate cooling and lubrication method is determined based on the analysis of the resulting tool wear, cutting force, tool temperature, surface finish and the chip morphology in cutting. It is found that 20% water-based cutting fluid and a flow rate of 20ml/hr are the proper combination of MQL. The use of MQL incorporates with a heat pipe assisting heat removal results in minimum tool wear. The cutting speed in turning Ti-6Al-4V titanium alloy can be increased from the normally recommended 50-70 m/min to 90m/min. Hence improvement of machining efficiency is expected. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/61388 | 其他識別: | zh-TW |
顯示於: | 機械工程學系 |
檔案 | 描述 | 大小 | 格式 | |
---|---|---|---|---|
ntu-94-R92522712-1.pdf | 23.53 kB | Adobe PDF | 檢視/開啟 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。