dc.relation.reference | Reference
1. Allsop, T.; Webb, D.J. and Bennion, I. “Investigations of the spectral sensitivity of long period gratings fabricated in three-layered optical fibre” Journal of Lightwave Technology, vol.21, pp.264-268, 2003a.
2. Allsop, T. ; Webb, D.J. and Bennion, I. “Bend and index insensitive long period grating in progressive three layered optical fibre” Electronics Letters, vol.39, pp.508-509, 2003b.
3. Allsop, T. ; Webb, D.J. and Bennion, I. “A comparison of the sensing characteristics of long period gratings written in three different types of fibre”, Optical fiber Tech., vol.9, pp.210-223, 2003c.
4. Besley, J.A.; Wang, T. and Reekie, L. “Fiber cladding mode sensitivity characterization for long-period gratings” Journal of Lightwave Technology, vol.21, no.3, pp. 848 – 853, 2003.
5. Bhatia, V. and Vengsarkar, A.M. “Optical fiber long-period grating sensors” Optics Letters, vol.21, pp.692-694,1996.
6. Brown, R.D. and Weertman, J. , “Mean Stress Effects on Crack Propagation Rate and Crack Closure in 7050-T76 Aluminum Alloy,” Engineering Fracture Mechanics, vol.10, no.4, pp.757-771 , 1978.
7. Cooper, K.R.; Elster, J.; Jones, M. and Kelly, R. G. “Optical fiber-based corrosion sensor systems for health monitoring of aging aircraft” AUTOTESTCON Proceedings, 2001. IEEE Systems Readiness Technology Conference. pp. 847-856, 2001.
8. El-Sherif, M.A. and Radhakrishnan, J. “Advanced composites with embedded fiber optic sensors for smart applications” Journal of Reinforced Plastics and Composites, vol.16, pp.144-154, 1997.
9. Elber, W. “Fatigue Closure under Cyclic Tension,” Engineering Fracture Mechanics, vol.2, pp.37-45, 1970.
10. Fallon, R.W.; Zhang,L. and Bennion, I. “Multiplexed identical broad-band-chirped grating interrogation system for large-strain sensing applications” IEEE Photonics Technology Letters, vol.9, pp.1616 –1618,1997a.
11. Fallon, R.W.; Everall, L.A.; Zhang, L. and Bennion, I. “ Multiple strain sensor interrogation with an asymmetric grating” Lasers and Electro-Optics CLEO 98. Technical Digest, pp.423-424,1998.
12. Fallon, R.W.; Zhang, L.; Gloag, A. and Bennion, I. “Identical broadband chirped grating interrogation technique for temperature and strain sensing” Electronics Letters, vol.33, pp.705 –707,1997b.
13. Ghatak, A. and Thyagrajan, K. “Introduction to Fiber Optics”, Cambridge University Press, 1998.
14. Gwandu, B.A.L.; Shu, X.; Allsop, T.D.P.; Zhang, W.; Zhang L. and Bennion, I. ”Simultaneous refractive index and temperature measurement using cascaded long-period grating in double-cladding fibre” Electronics Letters, vol.38, pp.695–696, 2002.
15. Hadzic, R. ; John, S. and Herszberg, I. “Structural integrity analysis of embedded optical fibres in composite structures” Composite Structures, vol.47, no.1, pp.759-765, 1999.
16. Han, K.J.; Lee, Y.W.; Kwon, J.; Roh, S.; Jung, J. and Lee, B. “Simultaneous measurement of strain and temperature incorporating a long-period fiber grating inscribed on a polarization-maintaining fiber” IEEE Photonics Technology Letters, vol.16, no.9, pp 2114-2116, 2004.
17. Hill, K.O.; Fujii, Y.; Johnson, D.C. and Kawasaki, B.S. “Photosensitivity in optical fiber waveguides: Application to reflection filter fabrication,” Applied Physics Letters, vol.32, no.10, pp. 647-649, 1978.
18. Hill, K. O.; Malo, B. ; Bilodeau, F. Johnson, D. C. and Albert, J. "Bragg Gratings Fabricated in Monomode Photosensitive Optical Fiber by UV Exposure through a Phase Mask," Applied Physics Letters, vol.62, no.10, pp.1035-1037, 1993.
19. Hill, P.C. and Eggleton, B.J. “Strain gradient chirp of fibre Bragg gratings,” Electronic Letters., vol.30, no.14, pp.1172-1174, 1994.
20. Hill, K.O. and Meltz, G. “Fiber Bragg Grating Technology Fundamentals and Overview,” Journal of Lightwave Technology, vol.15, no.8, pp.1263-1276, 1997.
21. Irving, P.E.; Robinson, J.L. and Beevers, C.J. “Study of the Effects of Mechanical and Environmental Variables on Fatigue Crack Closure,” Engineering Fracture Mechanics, vol.7, no.14, pp.619-630, 1975.
22. James, S.W. and Tatam, R.P. “Optical fibre long-period grating sensors: Characteristics and application” Measurement Science and Technology, vol.14, no.5, pp49-61, 2003.
23. Kashyap, R. “Fiber Bragg Grating”, Academic Press, 1998.
24. Kang, H.K.; Kang, D.H.; Bang, H.J.; Hong1, C.S. and Kim, C. G. “Cure monitoring of composite laminates using fiber optic sensors” Smart Materials and Structures, vol.11, pp.279-287, 2002.
25. Kashtalyan, M. and Soutis, C. “The effect of delaminations induced by transverse cracks and splits on stiffness properties of composite laminates” Composites: Part A, vol.31, pp.107–119, 2000
26. Kersey, A.D. and Berkoff, T.A. “Fiber optic Bragg grating differential temperature sensor” IEEE Photon Technology Letter, vol.4, pp.1183-1185, 1992.
27. Kersey, A.D.; Davis, M.A.; Patrick, H.J.; LeBlanc, M.; Koo, K.P.; Askins, C.G.; Putnam, M.A. and Friebele, E.J. “Fiber grating sensors,” Journal of Lightwave Technology, vol. 15, No. 8, pp.1442-1463, 1997.
28. Khaliq, S.; James, S.; Stephen, W. and Ralph, P.T., “Fiber-optic liquid-level sensor using a long-period grating” Optics Letters, vol.26, no.16, pp1224-1226, 2001.
29. Kuang, K.S.C.; Kenny, R.; Whelan, M. P.; Cantwell, W. J. and Chalker ,P. R. “Residual strain measurement and impact response of optical fibre Bragg grating sensors in fibre metal laminates” Smart Materials and Structures, vol.10, pp.338-346, 2001.
30. Lau, K.T. ; Yuan, L.; Zhou, L.M.; Wu, J. and Woo, C.H. “Strain monitoring in FRP laminates and concrete beams using FBG sensors” Composite Structures, vol.51, pp.9-20, 2000.
31. Lee B.H. and Nishii J. “Temperature sensor using the self-interference of a long-period fiber grating “ Proceedings of SPIE – The International Society for Optical Engineering, vol.3746, pp418-421, 1999.
32. Leng, J.S. and Asundi, A. “Non-destructive evaluation of smart materials by using extrinsic Fabry–Perèt interferometric and fiber Bragg grating sensors” NDT and E International, vol. 35, pp.273-276, 2002a.
33. Leng, J.S. and Asundi, A. “Real-time cure monitoring of smart composite materials using extrinsic Fabry–Perot interferometer and fiber Bragg grating sensors” Smart Materials and Structures, vol.11, pp.249-255, 2002b.
34. Leng, J.S. and Asundi, A. “Structural health monitoring of smart composite materials by using EFPI and FBG sensors” Sensors and Actuators A, vol.103, pp.330-340, 2003.
35. Lin, C.L. “Opto-Mechanical Applications of Microstructured Materials” PhD thesis, Joseph Fourier University /National Taiwan University, 2004.
36. Meltz, G.; Money, W. W. and Glem, W. H. "Formation of Bragg Gratings in Optical fibres by a Transverse Holographic Method," Optics Letters, vol.14, no.15, pp.823-825, 1989.
37. Meltz, G.; Morey, W.W. and Glenn, W.H. “Formation of Bragg gratings in optical fibers by a transverse holographic method,” Optics Letters, vol.14, no.15, pp. 823-825, 1989.
38. Murukeshan, V.M.; Chan, P.Y.; Ong, L.S. and Seah, L.K. “Cure monitoring of smart composites using fiber Bragg grating based embedded sensors,” Sensors and Actuators, Vol. 79, No. 2, 2000, pp. 153-161.
39. Murukeshan, V.M.; Chan, P.Y.; Ong, L.S. and Seah, L.K. “Cure monitoring of smart composites using fiber Bragg grating based embedded sensors,” Sensors and Actuators, Vol. 79, No. 2, 2000, pp. 153-161.
40. Ng, M.N.; Chen, Z. and Chiang, K.S. “Temperature compensation of long-period fiber grating for refractive-index sensing with bending effect”, IEEE Photonics Technology Letters, vol.14, no.3, pp361 –362, 2002.
41. Ogihara, S. ; Takeda, N. ; Kobayashi, S. and Kobayashi, A. “Damage mechanics characterization of transverse cracking behavior in quasi-isotropic CFRP laminates with interlaminar-toughened layers” International Journal of Fatigue, vol.24, pp.93-98, 2002.
42. Okabe, Y.; Yashiro, S. ; Kosaka, T. and Takeda, N. “Detection of transverse cracks in CFRP composites using embedded fiber Bragg grating sensors” Smart Materials and Structures, vol.9, pp.832-838, 2000.
43. Okabe, Y. ; Mizutani, T.; Yashiro, S. and Takeda, N. “Detection of microscopic damages in composite laminates with embedded small-diameter fiber Bragg grating sensors” Composites Science and Technology, vol.62, pp.951-958, 2002a.
44. Okabe, Y.; Tanaka, N. and Takeda, N. “Effect of fiber coating on crack detection in carbon fiber reinforced plastic composites using fiber Bragg grating sensors” Smart Materials and Structures, vol.11, no.6, pp.892-898, 2002b.
45. Okabe, Y.; Tsuji, R. and Takeda, N. “Effect of thermal residual stress on the reflection spectrum from fiber Bragg grating sensors embedded in CFRP laminates” Composites Part A: Applied Science and Manufacturing, vol.33, pp.991-999, 2002c.
46. Okabe, Y. ; Tsuji, R. and Takeda, N. “Application of chirped fiber Bragg grating sensors for identification of crack locations in composites” Composites Part A: Applied Science and Manufacturing, vol.35, no.1, pp.59-65, 2004.
47. Onur Kas, Y. and Kaynak, C. “Ultrasonic (C-scan) and microscopic evaluation of resin transfer molded epoxy composite plates” Polymer Testing, vol.24, pp.114–120, 2005.
48. Rao, Y.J.; Kalli, K. ; Brady, G.; Webb, D.J.; Jeckson, D.A.; Zhang, L. and Bennion, I. “Spatially-multiplexed fibre-optic Bragg grating strain and temperature sensor system based on interferometric wavelength-shift detection” Electronics Letters, vol.31, pp.1009-1010, 1995.
49. Rao, Y.J. “Recent Progress in Applications of In-Fibre Bragg Grating Sensors,” Optics and Lasers in Engineering, vol.31, no.3, pp.297-324, 1999.
50. Pang, C.M. and Song, J.H. “Crack Growth and Closure Behavior of Short Fatigue Cracks,” Engineering Fracture Mechanics, vol.47, no.13, pp.327-343 , 1994.
51. Paris, P.C. and Erdongan, F. “A critical Analysis of Crack Propagation Laws,” Journal of Basic Engineering, vol.85, pp.528-534, 1960.
52. Patrick, H.J.; Kersey, A.D. and Bucholtz, F. “ Analysis of the response of long period fiber gratings to external index of refraction”, Journal of Lightwave Technology, vol.16, pp.1606 –1612, 1998.
53. Saleh, B.E.A. and Teich, M.C. “fundamentals of Photonics”, Wiley Interscience, 1991.
54. Schlat, F. “Dynamic Compliance Measurement — a Proposed New and Efficient Method to Investigate Crack Nucleation and Propagation Phenomenon,” International Journal of Fracture, vol.19, no.2, pp.37–40 , 1982.
55. Seo, D.C. and Lee, J.J. “Damage detection of CFRP laminates using electrical resistance measurement and neural network” Composite Structures, vol.47, no.1, pp.525-530, 1999.
56. Sharpe, W.N. and Grandt, A.F. “A Preliminary Study of Fatigue Crack Retardation Using Laser Interferomerty to Measure Crack Surface Displacement, Mechanics Of Crack Growth,” ASTM STP590, pp.302–320, 1976.
57. Shin, C.S. and Smith, R.A. “Fatigue Crack Growth from Sharp Notches,” International Journal of Fatigue, vol.7, no.2, pp.87–93 , 1985.
58. Shin, C.S. and Fleck, N.A. “Overload Retardation in a Structural Steel,” Fatigue & Fracture Engng. Mat. & Struct, vol.9, no.5, pp.379–393 , 1987.
59. Skontorp, A. “Structural integrity of quasi-isotropic composite laminates with embedded optical fibers” Journal of Reinforced Plastics and Composites: vol.19, no.13, pp.1056-1077, 2000.
60. Song, J.H. and Ki, C.Y. “Fatigue Crack Closure and Growth Behavior under Random Loading,” Engineering Fracture Mechanics, vol.49, no.1, pp.105-120, 1994.
61. Summerscales, J. “Non-destructive testing of fiber reinforced plastics composite”, vol.1, Elsevier applied science publishers LTD, New Yark, 1987.
62. Takeda, N. “Characterization of microscopic damage in composite laminates and real-time monitoring by embedded optical fiber sensors” International Journal of Fatigue, vol.24, pp.281-289, 2002.
63. Takeda, S.; Okabe, Y. and Takeda, N. “Delamination detection in CFRP laminates with embedded small-diameter fiber Bragg grating sensors” Composites: Part A, vol.33, pp. 971–980, 2002.
64. Takeda*, S.; Okabe, Y.; Yamamoto, T. and Takeda, N. “Detection of edge delamination in CFRP laminates under cyclic loading using small-diameter FBG sensors” Composites Science and Technology, vol.63, pp.1885–1894, 2003
65. Takeda, N. ; Mizutani, T.; Hayashi, K. and Okabe, Y. “Application of fiber Bragg grating sensors to real-time strain measurement of cryogenic tanks” Proceedings of SPIE - The International Society for Optical Engineering, vol.5056, pp.304-311, 2003.
66. Talreja, R. “Fatigue of composite Materials” Technomic Publishing Co. Inc. Lancater. Penn. U.S.A., pp.3-58, 1987.
67. Tomasel, F.G. and Laura, P.A.A. “Assessing the Healing of Mechanical Structures through Changes in their Vibrational Characteristics as Detected by Fiber Optic Bragg Gratings” Journal of Sound and Vibration, vol. 253, pp.523-527, 2002.
68. Umezaki, E. “Improvement in separation of SMA from matrix in SMA embedded smart structures” Materials Science and Engineering, vol.A285, pp.363–369, 2000.
69. Vengsarkar, A. M.; Lemaire, P. J.; Jacobovitz-Veselka, G. Bhatia, V. and Judkins, J. B. “Long-period fiber gratings as gain-flattening and laser stabilizing devices,” in Proc. IOOC’95, PD1–2, Hong Kong, June 1995.
70. Vengsarkar, A. M.; Lemaire, P. J.; Judkins, J. B.; Bhatia, V.; Erdogan, T. and Sipe, J. E. “Long-period fiber gratings as band-rejection filters,” Journal of Lightwave Technology, vol. 14, pp. 58–64, 1996.
71. Wang, C.M. “Damage behaviors of notched composite laminates” PhD thesis, National Taiwan University, 2001.
72. Zhang, L.; Fallon, R.; Everall, L.A. ; Williams, J.A.R. and Bennion, I. “Large-dynamic-range and high-resolution from a strain sensing system using long-period grating interrogating FBG strain sensor” Optical Communication 24th European Conference, vol.1, pp. 609-610, 1998. | en |