DC 欄位 | 值 | 語言 |
dc.contributor | 陳復國 | zh-TW |
dc.contributor | 臺灣大學:機械工程學研究所 | zh-TW |
dc.contributor.author | 何羽健 | zh-TW |
dc.contributor.author | Ho, Yu-Chien | en |
dc.creator | 何羽健 | zh-TW |
dc.creator | Ho, Yu-Chien | en |
dc.date | 2009 | en |
dc.date.accessioned | 2010-06-30T09:19:56Z | - |
dc.date.accessioned | 2018-06-28T17:31:46Z | - |
dc.date.available | 2010-06-30T09:19:56Z | - |
dc.date.available | 2018-06-28T17:31:46Z | - |
dc.date.issued | 2009 | - |
dc.identifier.other | U0001-2707200917474900 | en |
dc.identifier.uri | http://ntur.lib.ntu.edu.tw//handle/246246/187135 | - |
dc.description.abstract | 由於鋁基金屬複合材料非常適合製作欲輕量化且又具高強度之產品,而其成形方法又是鋁基金屬複合材料發展之關鍵步驟,因此本文針對鋁基金屬複合材料A6061/Al2O3之鍛造成形進行研究,鍛造製程可以改善鑄造製程的低良率與低生產速度,且相較於鑄造可提升強度,因此對鋁基金屬複合材料而言是很有利的成形方式。因鋁基金屬複合材料鍛造成形目前並無完整參考文獻,故先針對鋁基金屬複合材料的高溫機械性質進行研究,探討鋁基金屬複合材料高溫成形之材料特性。再設計一特徵造型做為研究載具,以有限元素法模擬分析探討鍛造後的凸柱高度與側壁高度之關係。並以成形過程中材料之流動方式、凸柱高度及鍛造負荷等為指標,探討鍛造溫度、鍛造速度與不同潤滑劑等製程參數對材料流動的影響。本論文之研究,鍛造時沖頭上加毛邊槽,可改善材料流動,由特徵載具鍛造成形實驗與模擬結果比較,有限元素模擬分析可以準確預測鋁基金屬複合材料鍛造成形中之材料流動方式與成形力。 | zh-TW |
dc.description.abstract | Due to its lightweight and high specific strength, aluminum-based metal matrix composites have been widely used for structural components. Although the principle manufacturing process has been casting, the forging has considerable potential because of its competitive productivity and performance. As for forging, A6061/Al2O3 is considered as the suitable aluminum-based metal matrix composites for the manufacturing process at the present time. In the present study, the forging of aluminum-based metal matrix composites at elevated temperatures is studied by experiments and the finite element analysis. he forging process of a characteristic geometry is studied in the present study. The forging of aluminum-based metal matrix composites characteristic geometry at elevated forming temperatures was then investigated afterwards. In the forging process, a bulk is formed into the part shape in which a boss and side wall of certain height are required. In order to examine the effect of process parameters, such as forging temperature and forging velocity and die temperature and friction factor, on the formability of boss height, the finite element software DEFORM 2D is employed to simulate the forging processes, using the relations between boss and side wall height , material flow pattern, and forging load as forming index. The experimental results obtained in the present study provide the fundamentals for the forging aluminum-based metal matrix composites. | en |
dc.description.tableofcontents | 目錄 i目錄 iii目錄 vi一章 緒論 1.1 研究背景與目的 1.2 文獻回顧 3.3 研究方法及步驟 8.3.1 鋁基複合材料A6061/Al2O3材料性質比較 10.3.2 鋁基複合材料A6061/Al2O3之圓柱壓縮實驗 10.3.3 鋁基複合材料A6061/Al2O3之圓環壓縮實驗 10.3.4 選擇適當之基礎研究載具 11.3.5 建立鍛造成形之有限元素法電腦模擬分析模式 11.3.6 材料性質與製程參數之影響 12.3.7 建立鋁基複合材料鍛造成形之基礎設計準則 12.4 論文總覽 13二章 鋁基複合材料之機械性質 15.1 鋁基複合材料 15.1.1 鋁基複合材料A6061/Al2O3之簡介 16.1.2 材料性質比較 17.2 金相實驗 21.3 圓柱壓縮實驗 25.3.1 實驗規劃 26.3.2 試片準備 30.3.3 圓柱壓縮實驗結果 33.4 摩擦特性實驗 38.4.1 實驗規劃與設備 42.4.2 圓環壓縮實驗結果 44三章 鋁基複合材料鍛造成形特性之基礎研究 48.1 有限元素法DEFORM簡介 48.2 設計適當鍛造成形製程之基礎研究載具 51.2.1 市面上現有之汽機車和腳踏車之零組件分類與歸納 51.2.2 市面上現有之汽機車和腳踏車零組件之成形困難點 53.2.3 載具設計 54.3 鋁基複合材料鍛造成形之模擬模型建立 55.4 鋁基複合材料鍛造成形之初步模擬分析 57.4.1 鋁基複合材料鍛造製程模擬設定 57.4.2 鋁基複合材料鍛造製程模擬結果 59.4.3 收斂性分析 62.4.4 材料流動 63四章 鋁基複合材料鍛造製程分析 65.1 製程參數之模擬與結果討論 65.1.1 尺寸A分析 65.1.2 鍛造溫度分析 67.1.3 鍛造速度分析 69.1.4 定剪摩擦因子分析 71.2 模具改良之模擬分析 73.2.1 模型建立 73.2.2 模具改良後之模擬結果 75.2.3 模具改良後之材料流動方式 76.3 結果討論 78五章 有限元素分析之實驗驗證 80.1 實驗設備及鍛造流程 80.1.1 試驗機台 80.1.2 模具及其設計和材料之選擇 81.1.3 胚料及潤滑劑 86.1.4 鍛造流程 87.2 鍛造模擬之驗證 88.3 成品各特徵處之硬度值及金相顯微組織 91.4 鋁基金屬複合材料之成形性實驗 93.5結果討論 95六章 鋁基複合材料鍛造製程參數之靈敏度探討 96.1 鋁基複合材料鍛造製程之田口方法 96.1.1 模擬結果與S/N ratio之計算 99.1.2 ANOVA變異數分析 103.1.3 鍛造成形噸數之最佳值預測與驗證 106.1.4 全因子實驗 108.2 鍛造成形之改善效益 110.3 鋁基複合材料和鋁合金之鍛造成形考量 112七章 結論 113考文獻 116錄1 F分布表,F0.1,v2,v2 118 | en |
dc.format.extent | 3381956 bytes | - |
dc.format.mimetype | application/pdf | - |
dc.language | zh-TW | en |
dc.language.iso | en_US | - |
dc.subject | 鋁基金屬複合材料 | zh-TW |
dc.subject | A6061/Al2O3 | zh-TW |
dc.subject | 鍛造成形 | zh-TW |
dc.subject | 有限元素法 | zh-TW |
dc.subject | 高溫性質 | zh-TW |
dc.subject | 特徵造型 | zh-TW |
dc.subject | aluminum-based metal matrix composites | en |
dc.subject | forging | en |
dc.subject | characteristic geometry | en |
dc.subject | finite element method | en |
dc.subject | experimental | en |
dc.title | 鋁基金屬複合材料鍛造成形之研究 | zh-TW |
dc.title | A Study of Forging of Aluminum-Based Metal Matrix Composites | en |
dc.type | thesis | en |
dc.identifier.uri.fulltext | http://ntur.lib.ntu.edu.tw/bitstream/246246/187135/1/ntu-98-R96522717-1.pdf | - |
item.openairecristype | http://purl.org/coar/resource_type/c_46ec | - |
item.openairetype | thesis | - |
item.languageiso639-1 | en_US | - |
item.grantfulltext | open | - |
item.cerifentitytype | Publications | - |
item.fulltext | with fulltext | - |
顯示於: | 機械工程學系
|