https://scholars.lib.ntu.edu.tw/handle/123456789/68274
標題: | A Neural Network Approach for the On-line Estimation of Workpiece Height in WEDM | 作者: | Liao, Y.S. Yan, M.T. Chang, C.C. LiaoYS |
關鍵字: | Estimation; Neural network; Wire electrical discharge machining; Workpiece height | 公開日期: | 2002 | 期: | 121 | 起(迄)頁: | 252-258 | 來源出版物: | Journal of Materials Processing Technology | 摘要: | In this paper, a feed-forward neural network is used to estimate the workpiece height and distinguish the machining condition in wire electrical discharge machining (WEDM). Some experiments have been carried out to verify the effectiveness of this approach. Based on the on-line estimated workpiece height, a rule-based strategy is proposed to maintain optimal and stable machining. According to the rule-based strategy, servo voltage and power settings can be adjusted correctly to suit the workpiece profile. Experimental results demonstrate that high machining efficiency and stable machining can be achieved by means of the rule-based control strategy. © 2002 Elsevier Science B.V. All rights reserved. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/86988 https://www.scopus.com/inward/record.uri?eid=2-s2.0-0037186768&doi=10.1016%2fS0924-0136%2801%2901252-3&partnerID=40&md5=90e90bdc3249cc6df9778dd184ed90a9 |
ISSN: | 09240136 | SDG/關鍵字: | Control system analysis; Feedforward neural networks; Knowledge based systems; Online systems; Parameter estimation; Wire electrical discharge machining (WEDM); Electric discharge machining |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。