dc.description.abstract | After many years development and improvement, microscopy has been getting to be one of the most important precision metrology techniques. To meet the demand of the rapidly advanced micro-electro-mechanical system and nanotechnology, many instruments were invented by further integrating microscope into their systems. In the field of full-field measurement, high-speed electronic speckle pattern interferometry (ESPI) developed using high-speed CCD camera was first developed in 1978. Phase shifting interferometry was used to transform the speckle intensity information into the more desirable phase information. However, it is necessary to introduce a phase shifting device in the reference arm if phase shifting interferometry is to be implemented. However, adding phase shifting device significantly increases the system cost. Moreover, the measurement precision suffers due to the errors induced by the phase shifting device. For example, hysteresis of piezoceramic actuator can introduce errors in the range of several micrometers. The goal of this research is thus to develop a new ESPI system that can measure full-field and dynamic vibrations up to nanometer resolutions without the need to adopt the traditionally used phase shifting device. With the development of an innovative optical design and the associated signal-processing algorithm, phase shifting device is removed successfully from the optical system. Alignment and other related alignment and operational procedures is thus greatly simplified.
In this dissertation, high-speed CCD camera was used as the image system. An eight-wave retardation plate was added within the optical path to remove the phase shifting device. By means of short exposure time and precise time sequency control, transient information in a series of time scales could be obtained successfully. In image processing part of ESPI, time stepping quadrature phase shifting method, direct correlation method, noise reduction median filter, and path-independent phase unwrapping method were all integrated to reconstruct surface profile of specimen. By demonstrating the feasibility of time stepping quadrature phase shifting method, we successfully remove the phase shifting device from the system and basically eliminated the errors induced by the inaccurate phase modulation.
With regards to the experimental verifications, the electronic speckle image processing interface was developed by LabVIEW and the feasibility of the newly proposed optical configuration is demonstrated by optical simulation software. Finally, the feasibility of time stepping quadrature phase shifting method is verified experimentally. | en |
dc.relation.reference | (February, 2002). SensiCam Operating Instructions. Michigan.
(June 2003). LightTools Introductory Tutorial. California, USA, Optical Research Associates.
Austin (June 2003). LabVIEWTM Introduction Course Manual for Software Version 7.0. USA, National Instruments Co.
Bhaduri, B., N. K. Mohan, et al. (2006). "A dual-function ESPI system for the measurement of out-of-plane displacement and slope." Optics And Lasers In Engineering 44(6): 637-644.
Brown, G. M. and G. H. Smith (1989). "Dynamic computer aided video holometry." SPIE: 1162.
Capanni, A., L. Pezzati, et al. (1997). "Phase-shifting speckle interferometry: A noise reduction filter for phase unwrapping." Optical Engineering 36(9): 2466-2472.
Chen, C. W., H. Y. Chang, et al. (1998). "An innovative phase shifting system for non-destructive testing." Journal of Chinese Society of Applied Mechanics 14: 31-39.
Chen, F., W. D. Luo, et al. (2003). "High-speed ESPI and related techniques: overview and its application in the automotive industry." Optics And Lasers In Engineering 40(5-6): 459-485.
Cheng, Y. Y. and J. C. Wyant (1985). "Phase-Shifter Calibration In Phase-Shifting Interferometry." Applied Optics 24(18): 3049-3052.
Cookson, T. J., J. N. Butters, et al. (1978). "Pulsed Lasers In Electronic Speckle Pattern Interferometry." Optics And Laser Technology 10(3): 119-124.
Creath, K. (1985). "Phase-Shifting Speckle Interferometry." Applied Optics 24(18): 3053-3058.
D.Gabor (1947). Microscopy by reconstructed wavefronts. Proceedings of the Royal Society of London, London.
Edmund.Optics "http://www.edmundoptics.com/techsupport/."
Ferrari, J. A., E. M. Frins, et al. (2002). "A new scheme for phase-shifting ESPI using polarized light." Optics Communications 202(4-6): 233-237.
Ghiglia, D. C. and L. A. Romero (1994). "Robust 2-Dimensional Weighted And Unweighted Phase Unwrapping That Uses Fast Transforms And Iterative Methods." Journal Of The Optical Society Of America A-Optics Image Science And Vision 11(1): 107-117.
Hariharan, P., B. F. Oreb, et al. (1987). "Digital Phase-Shifting Interferometry - A Simple Error-Compensating Phase Calculation Algorithm." Applied Optics 26(13): 2504-2506.
Huntley, J. M. (1994). "High-Speed Laser Speckle Photography.1. Repetitively Q-Switched Ruby-Laser Light-Source." Optical Engineering 33(5): 1692-1699.
Huntley, J. M., G. H. Kaufmann, et al. (1999). "Phase-shifted dynamic speckle pattern interferometry at 1 kHz." Applied Optics 38(31): 6556-6563.
Huntley, J. M. and H. Saldner (1993). "Temporal Phase-Unwrapping Algorithm For Automated Interferogram Analysis." Applied Optics 32(17): 3047-3052.
Luo, W. D. (2001). Temporal phase measurement technique with applications to dynamic deformation measurement, surface profilometry and strain determination. Ph.D. thesis, Oakland University.
Malacara, D., M. Servín, et al. (1998). Interferogram Analysis for Optical Testing. New York, USA, Marcel Dekker.
Moore, A. J., D. P. Hand, et al. (1999). "Transient deformation measurement with electronic speckle pattern interferometry and a high-speed camera." Applied Optics 38(7): 1159-1162.
Pedrini, G., B. Pfister, et al. (1993). "Double Pulse-Electronic Speckle Interferometry." Journal Of Modern Optics 40(1): 89-96.
R.Jones and C.Wykes (1989). Holographic and speckle interferometry. UK, Cambridge University Press.
Reeves, M., N. Taylor, et al. (2000). "A study of brake disc modal behaviour during squeal generation using high-speed electronic speckle pattern interferometry and near-field sound pressure measurements." Proceedings Of The Institution Of Mechanical Engineers Part D-Journal Of Automobile Engineering 214(D3): 285-296.
Spooren, R. (1992). "Double-Pulse Subtraction Tv Holography." Optical Engineering 31(5): 1000-1007.
Takajo, H. and T. Takahashi (1988). "Least-Squares Phase Estimation From The Phase Difference." Journal Of The Optical Society Of America A-Optics Image Science And Vision 5(3): 416-425.
Vikhagen, E. and O. J. Lokberg (1997). "Speckle averaging in deformation analysis using video speckle interferometry." Optics And Lasers In Engineering 27(2): 179-190.
Wizinowich, P. L. (1990). "Phase-Shifting Interferometry In The Presence Of Vibration - A New Algorithm And System." Applied Optics 29(22): 3271-3279.
吳文中 (2003). 高性能量測系統之高速訊號處理平台. 國立台灣大學應用力學研究所博士論文.
吳錦源 (1998). 創新雷射都卜勒振動/干涉儀之研製-高性能微光機電系統之量測, 國立台灣大學應用力學研究所博士論文.
李宜璉 (2003). 全域三維暫態應變量測系統之設計與建構. 國立台灣大學應用力學研究所碩士論文.
高志誠 (2000). 以相位重建技術研製三維電子斑點干涉儀. 國立台灣大學應用力學研究所碩士論文.
陳怡君 (2000). 全域波傳量測系統之理論與實驗:以穩頻雙共振腔脈衝雷射為電子斑點干涉及全像記錄/重建光源之架構開發. 國立台灣大學應用力學研究所碩士論文.
陳昭宇 (2005). 高速電子斑點干涉儀之研製:整合雷射都卜勒干涉術與時進相移法之創新設計. 國立台灣大學應用力學研究所碩士論文.
楊國輝 and 黃宏彥 (2002). 雷射原理與量測概論. 台北市, 五南出版社. | zh_TW |