https://scholars.lib.ntu.edu.tw/handle/123456789/74509
標題: | 形狀記憶合金性能增進之研究─子計畫一--增進鈦鎳形狀記憶合金超彈性及制震能之研究(2/3) | 作者: | 吳錫侃 | 關鍵字: | Ti50Ni50 形狀記憶合金;晶粒大小;再結晶退火;超彈性;制震能;Ti50Ni50 shape memory alloy;recrystallization and grain size;DSC;tensile test;DMA | 公開日期: | 2004 | 出版社: | 臺北市:國立臺灣大學材料科學與工程學研究所 | 摘要: | Ti50Ni50 SMA 經由大量的冷加工和退火之後,會有回復、再結晶及晶粒成長三階段,並與材料的性能有密切相關,此因晶粒的大小及分佈會影響到本身的變態順序、超彈性(PE)及制震能(DC)等,進而促成性能之增進。根據DSC 之結果,由於冷 加工使再結晶之晶粒大小分佈不均,進而產生數個階段之相變態。在PE 的90℃拉伸結果發現,Ti50Ni50 在低溫短時間退火後,晶粒較小,會有最佳之PE 特性;而在DMA實驗中,則於中溫長時間退火後,會有最顯著的馳豫峰。由這些現象與理論的分析 可知,當Ti50Ni50 經大量的冷加工後,退火條件對於不同材料性能的影響,並非完全相同。 The transformation sequence, PE and DC of Ti50Ni50 alloy are affected by the grain size and distribution. The optimal annealing condition of severely cold-rolled Ti50Ni50 alloy can improve its characteristics through the recovery, recrystallization and grain growth. DSC results show that the inhomogeneity of grain size will exhibit multi-step transformation. The 90 tensile ℃ test results indicate that the better PE characteristic can be obtained by the annealing at lower temperature and shorter time. DMA results show that the most significant relaxation peak occurs by the annealing at medium temperature and long time. These features indicate that the severely cold-rolled and annealed Ti50Ni50 alloy can achieve its properties improvement if the optimal annealing conditions can be made. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/12469 | 其他識別: | 922216E002008 | Rights: | 國立臺灣大學材料科學與工程學研究所 |
顯示於: | 材料科學與工程學系 |
檔案 | 描述 | 大小 | 格式 | |
---|---|---|---|---|
922216E002008.pdf | 107.11 kB | Adobe PDF | 檢視/開啟 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。