https://scholars.lib.ntu.edu.tw/handle/123456789/77170
標題: | 工業廢水污泥與垃圾焚化灰渣共熔資材化影響因子之研究 | 作者: | 李公哲 | 關鍵字: | 氟化鈣污泥;焚化底渣;熔流 溫度;添加劑;操作溫度與時間;熔渣;卜作嵐活性;合成污泥;calcium fluoride sludge;incinerator bottom ash;pouring temperature;additives;operating temperature and time;slag;pozzolanic;artificial sludge | 公開日期: | 31-七月-2004 | 出版社: | 臺北市:國立臺灣大學環境工程學研究所 | 摘要: | 氟化鈣污泥/垃圾焚化底渣最適配 比為4:6,其鹽基度值接近1,可得最 低熔流溫度1079℃。當添加10%碳酸 鈉作為添加劑可使熔流溫度降低 51℃;此外添加1%碳酸鉀則可較低 20℃,但添加超過1%時降溫效果逐漸 降低。透過不同之操作溫度(1100∼ 1300℃)與操作時間(10∼50min)可 有效提升熔渣細骨材之物裡性質。經由 MIP、DSC、NMR、XRD、SEM 分析 均證實熔渣具有卜作嵐活性(90∼98 %)。透過合成污泥之熔流溫度比較分 析,可證實實廠污泥中之次要成分(如 B、Mg、K)可有效降低熔流溫度約 245℃。 Based on the experimental results, when calcium Fluoride sludge mixed with MSWI bottom ash under the ratio 4:6, it showed the lowest pouring temperature 1079 accompanied by the ℃ basicity value closed to 1. Besides, the pouring temperature decreased 51 w ℃ ith 10% of Na2CO3 added into the mixed sludge. The temperature decreased 20 ℃ with 1% K2CO3 addition, but more than 1% was added into the mixed sludge would effect caused adverse. Under different operating temperatures (1100~1300 ) and times(10~50min), it ℃ showed that both parameters could enhance the physical properties of slags. Moreover, all the slags demonstrated pozzolanic activity (90~98% of SAI) by the analysis of MIP, DSC, NMR, XRD, SEM. By comparing the pouring temperature of synthetic sludge to on-site sludge, it showed that the minor ingredients (e.g. B, Mg, K) could reduce the pouring temperature substantially about 245 . |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/22135 | 其他識別: | 922211E002031 | Rights: | 國立臺灣大學環境工程學研究所 |
顯示於: | 環境工程學研究所 |
檔案 | 描述 | 大小 | 格式 | |
---|---|---|---|---|
922211E002031.pdf | 262.52 kB | Adobe PDF | 檢視/開啟 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。