https://scholars.lib.ntu.edu.tw/handle/123456789/79083
標題: | Morphological instability in a directionally solidifying binary solution with an imposed shear flow | 作者: | Chung, C.A. Chen, Falin |
公開日期: | 2001 | 出版社: | 臺北市:國立臺灣大學應用力學研究所 | 起(迄)頁: | 85-106 | 來源出版物: | Journal of Fluid Mechanics | 摘要: | The eect of an imposed shear flow on the stability of directionally solidifying binary alloys is investigated. It is shown that without the imposed shear flow the system is dominated by stationary boundary-layer-mode convection, a convection of salt- nger type conned to the solute boundary layer above the melt/mush interface. When the shear flow (no matter how small) is imposed, the boundary-layer mode becomes a longitudinal mode (roll-axis parallel to the imposed flow) propagating in the direction perpendicular to the shear flow, while the modes containing a transverse component are inhibited. As the shear flow becomes large enough, a transverse mode (roll-axis perpendicular to the imposed flow) of very unstable characteristics is induced. This mode, called the morphological mode, can exist even without buoyancy. It is triggered by the flow induced in the mushy layer through the Bernoulli force, a pressure variation resulting from the imposed flow passing along the corrugated melt/mush interface. It, nonetheless, has no relation to the boundary layer instability of the shear flow. The eect of imposed shear flow is so signicant that the stability characteristics can be entirely dierent when the intensity of the imposed flow is larger than a critical value, which is calculated in the present paper. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/20060927121657617336 | 其他識別: | 20060927121657617336 |
顯示於: | 應用力學研究所 |
檔案 | 描述 | 大小 | 格式 | |
---|---|---|---|---|
3-article.pdf | 1.68 MB | Adobe PDF | 檢視/開啟 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。