https://scholars.lib.ntu.edu.tw/handle/123456789/80305
標題: | 渦輪機葉片尾流控制之實驗與計算探討 Study of Wake Control for Turbomachinery Blades (1/3) |
作者: | 胡文聰 | 關鍵字: | 軸流壓縮機;流場控制;葉片尾緣噴氣;axial compressor;flow control;trailing edge flow ejection | 公開日期: | 31-七月-1999 | 出版社: | 臺北市:國立臺灣大學應用力學研究所 | 摘要: | 本文以實驗探討軸流壓縮機內非定常 流場中,利用轉子尾緣噴氣來控制轉子尾 流,找出其對定子葉片的影響。主要的實 驗設備為一低速大型軸流式壓縮機,在轉 子葉片定量噴氣(30m/s)、不同的轉子/定 子葉片列軸間距、不同負載(設計點、高 負載)下對單級轉子與定子間之非定常流 場進行速度以及定子葉片受力的量測。欲 進行此一實驗,吾人得先發展出一特殊之 噴氣轉子葉片,此一轉子葉片的噴氣均勻 程度,對整個實驗的結果有決定性的影 響。由於渦輪機轉子葉片很薄,因此想要 在渦輪機轉子葉片內部埋置流道及管路, 需經由特殊的設計及加工。更重要的是, 吾人希望噴氣葉片在距離葉片尾緣10%弦 長處,能有一均勻的速度分布,欲達到此 一均勻的速度分布,吾人發展出一微調技 術,藉此調整葉片噴氣速度分布的均勻程 度。 This works aims to perform a series of experimental studies on flow control in a low-speed, large-scale, axial flow compressor. Specifically, air will be ejected from the rotor blade trailing edge in an attempt to interact with the stator downstream. Measurement will be made on the rotor wake with and without flow ejection, as well as the unsteady force on the stator. Due to the thinness of the rotor blade, the first year effort was mainly on overcoming the tremendous difficulty in obtaining an uniform ejected flow at 10% chord downstream of the rotor trailing edge. Various designs were attempted and the final version uses embedded tubes within the blade and ejected flow was also fine tuned using a special technique. Results show an acceptable uniform ejected flow. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/21555 | 其他識別: | 882212E002060 | Rights: | 國立臺灣大學應用力學研究所 |
顯示於: | 應用力學研究所 |
檔案 | 描述 | 大小 | 格式 | |
---|---|---|---|---|
882212E002060.pdf | 310.64 kB | Adobe PDF | 檢視/開啟 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。