https://scholars.lib.ntu.edu.tw/handle/123456789/82056
Title: | 晶圓廠設備整體效能提昇與管理系統─子計畫二:晶圓廠組態設計與設備運用(1/3) | Authors: | 周雍強 | Keywords: | 產能規劃;機台組態規劃;機台備援規劃;Capacity planning;tool portfolio planning;tool backup planning | Issue Date: | 1999 | Publisher: | 臺北市:國立臺灣大學工業工程學研究所 | Abstract: | 晶圓廠的資本需求龐大,但是生產設備的 有效使用率一般不到50%。對整體工廠系統而 言,各項設備在製程能力與產能上的匹配度不 僅影響個別設備的效能水平,也奠定企業經營 的績效水平。本計畫之研究重點為分析晶圓廠 產能、發展機台組態之規劃程序與方法,並開 發出一個強調生產敏捷性的決策系統。本計畫 的工作項目有:(1) 發展精確的產能計算模 式,(2) 發展機台組態的規劃方法,(3)發展 機台的運用方法,(4)建構機台組態規劃的決 策系統。本計畫的成果有:產能規劃的程序與 方法、產能計算模式、機台組態規劃方法、以 及一個決策系統。 The overall equipment effectiveness of wafer fabs has lingered at a level below 50%. The effectiveness of a wafer fab is affected directly by its configuration of primary processing tools. Capability or capacity imbalance among primary generally results in long-term losses of equipment effectiveness at the factory level. This project proposes to develop fab configuration design and analysis methodology to prevent or lessen capability and capacity mismatch of manufacturing resources in the environment of production ramp-up and rapid product mix change. This project has three major tasks: capacity modeling, tool portfolio planning, and tool backup planning. This project has resulted in a collection of capacity planning procedure and methodology, tool portfolio planning methodology and a software decision system. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/4174 | Other Identifiers: | 882212E002062 | Rights: | 國立臺灣大學工業工程學研究所 |
Appears in Collections: | 工業工程學研究所 |
File | Description | Size | Format | |
---|---|---|---|---|
882212E002062.pdf | 40.25 kB | Adobe PDF | View/Open |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.