DC 欄位 | 值 | 語言 |
dc.contributor | 臺灣大學: 醫學工程學研究所 | zh-TW |
dc.contributor | 林啟萬 | zh |
dc.contributor.author | 林珍岑 | zh-TW |
dc.contributor.author | Lin, Jhen-Cen | en |
dc.creator | 林珍岑 | zh-TW |
dc.creator | Lin, Jhen-Cen | en |
dc.date | 2012 | en |
dc.date.accessioned | 2013-03-29T08:37:15Z | - |
dc.date.accessioned | 2018-06-29T00:55:17Z | - |
dc.date.available | 2013-03-29T08:37:15Z | - |
dc.date.available | 2018-06-29T00:55:17Z | - |
dc.date.issued | 2012 | - |
dc.identifier.uri | http://ntur.lib.ntu.edu.tw//handle/246246/254739 | - |
dc.description.abstract | 本研究以沾筆式奈米微影術 (Dip-Pen Nanolithgraphy, DPN) 在3-甘油基丙基三甲基矽烷氧 (3-glycidoxypropyltrimethoxysila, GPTS) 修飾之玻璃基材上製造鏈霉親和素異-硫氰酸螢光素 (streptavidin-FITC) 之蛋白質奈米陣列 (protein nanoarray ),探討蛋白質墨水性質以及探針駐留時間 (dwell time) 對製程結果的影響。本實驗製備兩種蛋白質墨水:Streptavidin-FITC分別溶於正常磷酸生理緩衝液 (1xPhosphate buffer saline, 1x PBS) 與市售聚合物載體。研究結果顯示,墨水性質對蛋白質點直徑大小、點直徑變異以及墨水消耗速度有顯著的影響,提高墨水黏滯性可減少點直徑變異並減少墨水消耗速度,藉此提升DPN製程的穩定性。控制探針駐留時間可製造不同直徑的蛋白質點。當探針駐留時間為一秒時,溶於1x PBS的streptavidin-FITC墨水製造之點直徑為4.24 ± 0.85 um;溶於市售聚合物載體的streptavidin-FITC墨水製造之點直徑為7.43 ± 0.30 um。另外,利用溶於聚合物之streptavidin-FITC墨水製造之蛋白質奈米陣列的產量為每分鐘300個點,點陣列密度約為每平方微米13000個點。本研究結果探討各項參數對製程的影響,並提升DPN之蛋白質奈米陣列製程的穩定性。 | zh-TW |
dc.format.extent | 140 bytes | - |
dc.format.mimetype | text/html | - |
dc.language | en | en |
dc.language.iso | en_US | - |
dc.subject | 沾筆式奈米微影術 | zh |
dc.subject | 蛋白質奈米陣列 | zh |
dc.subject | 蛋白質墨水性質 | zh |
dc.subject | 駐留時間 | zh |
dc.subject | Dip-pen nanolithography | en |
dc.subject | protein nanoarray | en |
dc.subject | ink property | en |
dc.subject | dwell time | en |
dc.title | 以沾筆式奈米微影術於玻璃基材上製造蛋白質奈米陣列 | zh-TW |
dc.title | Direct Deposition of Protein Nanoarray onto Glass Substrates via Dip-Pen Nanolithography | en |
dc.type | thesis | en |
dc.identifier.uri.fulltext | http://ntur.lib.ntu.edu.tw/bitstream/246246/254739/1/index.html | - |
item.openairecristype | http://purl.org/coar/resource_type/c_46ec | - |
item.openairetype | thesis | - |
item.languageiso639-1 | en_US | - |
item.grantfulltext | open | - |
item.cerifentitytype | Publications | - |
item.fulltext | with fulltext | - |
顯示於: | 醫學工程學研究所
|