Chang C.-YSEN-YEU YANGHuang L.-SHsieh K.-H.2022-11-162022-11-16200610944087https://www.scopus.com/inward/record.uri?eid=2-s2.0-33745435040&partnerID=40&md5=2ffa2acc923ff4dd0e9f4b4437bb3048https://scholars.lib.ntu.edu.tw/handle/123456789/625277This paper reports a simple and effective method to fabricate microlens arrays with the ultraviolet-curable resins, and a soft mold of micro-holes array. During capillary forming operation, the surface of the soft mold of micro-holes array is being pressed against the ultraviolet-curable resin layer coated on the plastic substrate. An array of convex lense can be formed in the circular holes of the soft mold due to the capillary filling and surface tension. The microlens arrays have smooth surface and uniform focusing function. The shape and height of micolens can be controlled with a proper combination of pressing pressure, pressing duration and UV curing dose. This technique shows great potential for fabricating polymer microlens arrays with high productivity and low cost. ©2006 Optical Society of America.Plastic coatings; Polymers; Surface tension; Ultraviolet detectors; Capillary filling; Micro-holes array; Microlens arrays; Ultraviolet-curable resins; Arraysjournal article2-s2.0-33745435040