職業醫學與工業衛生研究所;Institute of Occupational Medicine and Industrial HygieneHU, SUH-WOANSUH-WOANHUWU, TZU-CHINTZU-CHINWUHONG, CHUN-CHENGCHUN-CHENGHONGCHAN, CHANG-CHUANCHANG-CHUANCHAN2008-06-272018-06-292008-06-272018-06-292006http://ntur.lib.ntu.edu.tw//handle/246246/75798Background Dental laboratory technicians are exposed to dust and/or methyl methacrylate (MMA) in the workplace. Potential effects of the exposures on lung function merit further clarification. Methods This study measured lung function of 45 dental technicians, before and after shifts, on 3 workdays and monitored workplace concentrations of particulate matter with aerodynamic diameter less than 2.5 mm (PM2.5) and MMA in five dental laboratories it? Taiwan. Base metals in particles were analyzed by X-ray fluorescence . Repeated measurement analysis was applied to estimate potential effects Of PM2.5 Oil Pulmonary function. Results PM2.5 ranged from 26 mu g/m(3) to 664 mu g/m(3) and levels of MMA were low in these laboratories. Nickel, cobalt, and chromium were detected in the particles. After controlling for important factors, PM2.5 was associated with a small decrease in forced vital capacity, and forced expiratory flow in one second. Conclusion Workplace PM2.5 was associated with a non-significant decrease in lung function of dental technicians.application/en-USdental laboratory technicianparticulate mattermethyl methacrylatebase metalslung functionoccupational exposure[SDGs]SDG11journal article