Cui, ShihaoShihaoCuiZhang, RanRanZhangPeng, YutaoYutaoPengGao, XingXingGaoLi, ZheZheLiFan, BeibeiBeibeiFanCHUNG-YU GUANBeiyuan, JingziJingziBeiyuanZhou, YaoyuYaoyuZhouLiu, JuanJuanLiuChen, QingQingChenSheng, JieJieShengGuo, LiliLiliGuo2024-10-012024-10-012022https://www.scopus.com/inward/record.uri?eid=2-s2.0-85111904838&doi=10.1016%2fj.jhazmat.2021.126773&partnerID=40&md5=9d867cb855171f85ad940fdf2deddbc4https://scholars.lib.ntu.edu.tw/handle/123456789/721729The below given are replacement images for figures 1,2,3, 4, 6, 7. [Formula presented] [Formula presented] [Formula presented] [Formula presented] [Formula presented] [Formula presented] The first picture about the adsorption kinetics fitting results in this document should be Fig. 6 in the original published document; The second picture of XPS characterization results in this document should be Fig. 4 in the original published document; The third picture of Raman analysis results in this document should be Fig. 3 in the original published document; The fourth picture of XRD characterization results in this document should be Fig. 2 in the original published document; The fifth picture of SEM results in this document should be Fig. 1 in the original published document; The sixth picture of XPS characterization results in this document should be Fig. 7 in the original published document. The authors would like to apologise for any inconvenience caused. © 2021 Elsevier B.V.Corrigendum to: “New insights into ball milling effects on MgAl-LDHs exfoliation on biochar support: A case study for cadmium adsorption” (Journal of Hazardous Materials (2021) 416, (S030438942101222X), (10.1016/j.jhazmat.2021.126258))corrigendum10.1016/j.jhazmat.2021.1267732-s2.0-85111904838