Lin, C.-Y.C.-Y.LinLai, Y.-H.Y.-H.LaiChen, H.-W.H.-W.ChenChen, J.-G.J.-G.ChenKung, C.-W.C.-W.KungVittal, R.R.VittalHo, K.-C.K.-C.HoKUO-CHUAN HO2018-09-102018-09-102011http://www.scopus.com/inward/record.url?eid=2-s2.0-80052198763&partnerID=MN8TOARShttp://scholars.lib.ntu.edu.tw/handle/123456789/363177Zinc oxide (ZnO) nanosheets (ZnO-NS) were prepared for the photoanode of a dye-sensitized solar cell (DSSC), first by directly growing layered hydroxide zinc carbonate (LHZC) on an FTO substrate using a chemical bath deposition (CBD) method and then by transforming the LHZC into ZnO through pyrolysis at 300 °C. A light-to-electricity conversion efficiency (η) of 6.06% was achieved for the DSSC with ZnO-NS as its photoanode, under 100 mW cm -2 illumination, and this (η) was found to be much higher than that of the DSSC with ZnO nanoparticles (ZnO-NP) as the photoanode (2.92%). The far superior performance of the DSSC with ZnO-NS is essentially attributed to (i) higher effective electron diffusion coefficient of ZnO-NS (3.59 × 10 -3 cm 2 s -1) than that of ZnO-NP (1.12 × 10 -3 cm 2 s -1), and to (ii) higher dye loading on ZnO-NS (2.66 × 10 -7 mol cm -2) than that on ZnO-NP (1.99 × 10 -7 mol cm -2); this higher electron diffusion coefficient and dye-loading are attributed to the specific morphology of the ZnO-NS. A further improvement in the efficiency of the DSSC with ZnO-NS could be achieved through the electrophoretic deposition (EPD) of a very thin layer (3 μm) of titanium dioxide nanoparticles (TiO 2-NPs of average size 14 nm) onto the ZnO-NS layer (12 μm). Notwithstanding a decrease in the effective electron diffusion coefficient (3.07 × 10 -3 cm 2 s -1) in the TiO 2-NP/ZnO-NS film, with reference to that in the ZnO-NS film (3.59 × 10 -3 cm 2 s -1), a far higher cell efficiency was obtained in favor of the cell with TiO 2-NP/ZnO-NS (7.07%), compared to that of the cell with bare ZnO-NS (6.06%); this enhancement in the η of the cell with TiO 2-NP/ZnO-NS is ascribed to an increased dye-loading in favor of its cell (3.92 × 10 -7 mol cm -2), with reference to that in the case of the cell with bare ZnO-NS (2.66 × 10 -7 mol cm -2). As against the common ruthenium dyes, such as N3 and N-719, a metal-free dye, coded as D149, was used in this research. The efficiency achieved for the best DSSC in this work is the highest ever reported for a DSSC with ZnO as the main semiconductor material. © 2011 The Royal Society of Chemistry.[SDGs]SDG7Average size; Cell efficiency; Chemical-bath deposition; Dye loading; Dye-Sensitized solar cell; Dye-sensitized solar cells; Electron diffusion coefficient; Electrophoretic depositions; Layered hydroxide zinc carbonates; Photoanode; Ruthenium dye; Thin layers; TiO; Titanium dioxide nanoparticles; ZnO; ZnO nanoparticles; Conversion efficiency; Cracking (chemical); Deposition; Diffusion; Dyes; Efficiency; Electrophoresis; Loading; Nanoparticles; Nanosheets; Nanostructured materials; Photoelectrochemical cells; Ruthenium; Solar cells; Titanium; Titanium dioxide; Zinc; Zinc oxide; dye; efficiency measurement; electricity generation; electrode; electrokinesis; electron; energy efficiency; film; fuel cell; oxide; performance assessment; pyrolysis; renewable resource; ruthenium; solar power; solar radiation; substrate; titanium; transformation; zincjournal article10.1039/c0ee00587h