張宏鈞Chang, Hung-chun臺灣大學:光電工程學研究所陳明昀Chen, Ming-yunMing-yunChen2010-07-012018-07-052010-07-012018-07-052009U0001-1208200917184200http://ntur.lib.ntu.edu.tw//handle/246246/188470本論文提出以全向量有限差分頻域法推得標準特徵方程式，以之分析具各向異性材料的光波導及光子晶體。利用全向量式有限差分頻域法之波導模態求解模型，得以簡單而有效率地計算出含任意導電率張量的各向異性光波導的導波模態，例如鈮酸鋰光波導和液晶光波導。本研究引入適用各向異性材料的完美匹配吸收層於計算區域的外圍，因此得以分析計算洩漏式光波導。對於含各向同性或平面各向異性材料的二維光子晶體的能帶分析，在波傳播方向為平行於週期性平面而橫向電場與橫向磁場波模不互相耦合的情況下，本研究以純量有限差分頻域法推導特徵方程式做有效率的計算。本研究進而推導同時考慮電場與磁場分量的全向量特徵方程式以分析具任意三維各向異性的二維光子晶體，此時橫向電場與橫向磁場波模通常呈耦合狀態。此全向量特徵方程式可進一步推展以分析具任意導電率張量的三維光子晶體，本研究以之計算探討三維各向同性簡單立方光子晶體及具各向同性或各向異性材料的光子晶體平板結構的能帶特性。了各向異性波導模態與光子晶體能帶的計算外，本研究亦推導標準特徵方程式以分析計算具一維週期與忽略損耗的實際金屬的二維三維表面電漿子波導，得以有效率地獲得二維及三維週期性波導的色散能帶特性與導波模態。We propose full-vectorial finite-difference frequency-domain (FDFD) method basedtandard eigenvalue algorithms for analyzing anisotropic optical waveguides andhotonic crystals (PCs). Using the established full-vectorial waveguide mode solver,e can easily and efficiently calculate allowed guided modes on anisotropic opticalaveguides with an arbitrary permittivity tensor, such as lithium niobate and liq-id crystal (LC) optical waveguides. We also incorporate perfectly matched layersPMLs) for anisotropic media into our formulation as the absorbing boundary condi-ion at the outer boundaries of the computational domain so that leaky waveguidesan be treated.or band diagram analysis of 2-D PCs with isotropic or in-plane anisotropic ma-erials under the in-plane wave propagation for which the waves can be decouplednto transverse-electric (TE) and transverse-magnetic (TM) modes, we formulate thecalar FDFD method based eigenvalue algorithm. We then develop a full-vectorialDFD based eigenvalue algorithm to analyze band diagrams of 2-D PCs with ar-itrary 3-D anisotropy, in which the TE and TM modes are coupled. The bandiagram analysis algorithm is further generalized to investigate 3-D PCs with anrbitrary permittivity tensor. The band diagrams of 3-D simple cubic PCs or PClab structures with isotopic and anisotropic media are examined and investigated.n addition to the algorithms for anisotropic waveguide modes and PC bandiagrams, we derive a standard eigenvalue algorithm for analyzing 2-D and 3-Durface plasmonic waveguides with 1-D periodicity and involving real metals ignoringhe losses. We are able to efficiently obtain dispersion band characteristics anduided mode patterns for 2-D and 3-D periodic waveguides.1 Introduction 1.1 Photonic Crystals and Surface Plasmon Nanophotonics . . . . . . . . 1.2 Numerical Schemes for the Analysis of Optical Waveguides and Pho-onic Crystals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.3 Overview and Organization of the Dissertation . . . . . . . . . . . . . 4.4 Contributions of the Present Work . . . . . . . . . . . . . . . . . . . 5 The Finite-Difference Frequency-Domain Method 8.1 Full-Vectroial Waveguide Mode Solver Considering Arbitrary Permit-ivity Tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9.2 Scalar Analysis Method for 2-D Photonic Crystals Involving In-Planeon-Diagonal Permittivity Tensor . . . . . . . . . . . . . . . . . . . . 14.2.1 The FDFD Formulation . . . . . . . . . . . . . . . . . . . . . 15.2.2 Periodic Boundary Conditions for the 2-D PC . . . . . . . . . 16.2.3 Dielectric-Interface Treatment . . . . . . . . . . . . . . . . . . 17.3 Full-Vectorial Analysis Method for 2-D Photonic Crystals Involvingrbitrary Permittivity Tensor . . . . . . . . . . . . . . . . . . . . . . 18.4 Formulation for Band Diagram Analysis of 3-D PCs with Non-Diagonalermittivity Tensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20.5 Formulation for Band Diagram Analysis of 1-D Periodic Arrays ofetallic Films . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24.5.1 2-D Structures . . . . . . . . . . . . . . . . . . . . . . . . . . 24.5.2 3-D Structures . . . . . . . . . . . . . . . . . . . . . . . . . . 26 Numerical Results of Anisotropic Waveguides with an Arbitraryermittivity Tensor 36.1 Proton-Exchanged LiNbO3 (PE-LN) Optical Waveguides . . . . . . . 37.2 Liquid Crystal Optical Waveguides . . . . . . . . . . . . . . . . . . . 39.3 Analysis of Nematic Liquid Crystal Optical Waveguides in Silicon-Grooves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41 Numerical Results for Band Diagram Analysis of 2-D and 3-D Pho-onic Crystals 57.1 Band Diagrams for 2D Isotropic Photonic Crystals . . . . . . . . . . 58.1.1 Square Lattice . . . . . . . . . . . . . . . . . . . . . . . . . . . 58.1.2 Triangular Lattice . . . . . . . . . . . . . . . . . . . . . . . . 59.2 Band Diagrams for 2-D Photonic Crystals with In-Plane Anisotropy . 60.2.1 Square Lattice . . . . . . . . . . . . . . . . . . . . . . . . . . . 60.2.2 Triangular Lattice . . . . . . . . . . . . . . . . . . . . . . . . 61.3 Band Diagrams Analysis for 2-D Photonic Crystals with Arbitrary-D Anisotropy Under In-Plane and Out-of-Plane Wave Propagation 63.4 Band diagrams for 3D Photonic Crystals . . . . . . . . . . . . . . . . 65.4.1 3-D Simple Cubic Photonic Crystal: Sphere Structures . . . . 65.4.2 3-D Photonic Crystal Slabs with Isotropic Materials . . . . . . 66.4.3 3-D Photonic-Crystal Slabs with Anisotropic Materials . . . . 68 Analysis of Surface Plasmonic Waveguides 97.1 Circular-Nanorod Plasmonic Waveguides . . . . . . . . . . . . . . . . 98.2 Periodic Arrangement of 2-D Subwavelength Slits . . . . . . . . . . . 99.3 Periodic Arrangement of 3-D Subwavelength Slits – PEC Case . . . . 101.4 Periodic Arrangement of 3-D Subwavelength Slits – Real Metal Case 102 Conclusion 12117792983 bytesapplication/pdfen-US有限差分頻域法各向異性材料表面電漿子波導finite-difference frequency-domain methodanisotropic materialssurface plasmonic waveguidethesishttp://ntur.lib.ntu.edu.tw/bitstream/246246/188470/1/ntu-98-D93941017-1.pdf