https://scholars.lib.ntu.edu.tw/handle/123456789/322337
標題: | Effect of oversize in wire-screen matrix to the matrix-holding tube on regenerator thermal performance | 作者: | CHEN, PH CHANG, ZC HUANG, BJ PING-HEI CHEN |
關鍵字: | Cryocoolers; Heat transfer measurements; Regenerators | 公開日期: | 1996 | 卷: | 36 | 期: | 5 | 起(迄)頁: | 365-372 | 來源出版物: | Cryogenics | 摘要: | A typical regenerator in a cryocooler is usually made by packing hundreds of finemesh but oversize wire screens into a small circular tube to provide better thermal performance. By the use of the oversize wire screens, the flow leakage around the inner circumference of the tube is significantly reduced. The oversize in the wire screen is the difference between the diameter of the wire screen and the inner diameter of the tube. In the present study a single-blow test method was used to investigate the effect of oversize on the thermal performance of regenerators. Heat transfer and pressure measurements were performed on three test regenerators. The value in oversize ranged from 0.05 mm to 0.55 mm. The average heat transfer rate of regenerators increases with oversize of wire screens. In addition, empirical relations are provided for the Nusselt number and friction factor versus the Reynolds number for each test regenerator. |
URI: | http://scholars.lib.ntu.edu.tw/handle/123456789/322337 https://www.scopus.com/inward/record.uri?eid=2-s2.0-0030151034&doi=10.1016%2f0011-2275%2896%2981107-6&partnerID=40&md5=e7df942ff5f9d49eeecbf0c901a41895 |
ISSN: | 00112275 | SDG/關鍵字: | Calculations; Friction; Heat transfer; Nusselt number; Pressure measurement; Reynolds number; Thermal variables measurement; Tubes (components); Cryocoolers; Heat transfer rate; Oversize wire screen matrix; Single blow test method; Regenerators |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。