https://scholars.lib.ntu.edu.tw/handle/123456789/632136
標題: | New tools for structural testing: Piezoelectric impact hammers and acceleration rate sensors | 作者: | CHIH-KUNG LEE CHIH-TING LIN Hsiao C.C Liaw W.C. |
公開日期: | 1997 | 來源出版物: | 35th Aerospace Sciences Meeting and Exhibit | 摘要: | Small size ultra-high precision mechanical systems demand special testing methodologies, such as a better high frequency response, a precise impact position, an extremely high repeatability, etc. Utilizing the fact that signals obtained from piezoelectric sensing elements are strongly influenced by the interfacing circuitry, piezoelectric sensors which can measure acceleration rate were developed. Both analytical and experimental results indicate that acceleration rate sensors can detect the arrival of realistic shock earlier than that of conventional accelerometers. An ultra-high precision high speed piezoelectric impact system with an on-line loadcell was also modeled, designed, and built. The sensitivity of this on-line loadcell was calibrated by using a standard quartz loadcell. This innovative high speed impact hammer system was found to have a timing accuracy in the range of micro-seconds and a positioning accuracy in the range of micrometers. Finally, modal testing was performed by combining the impact hammer system and acceleration rate sensors. © 1997 American Institute of Aeronautics and Astronautics, Inc. All rights reserved. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84983208835&partnerID=40&md5=415e249f711cce96371a6a4295857daa https://scholars.lib.ntu.edu.tw/handle/123456789/632136 |
SDG/關鍵字: | Aerospace engineering; Frequency response; Hammers; Modal analysis; Acceleration rates; High frequency response; High speed impact; Mechanical systems; Piezoelectric sensors; Positioning accuracy; Structural testing; Testing methodology; Piezoelectricity |
顯示於: | 電機工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。