公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 |
2021 | High-performance complementary electrochromic device based on iridium oxide as a counter electrode | Ko T.-F; Chen P.-W; Li K.-M; Young H.-T; Chang C.-T; Hsu S.-C.; KUAN-MING LI | Materials | | | |
2013 | Improving the dielectric breakdown field of silicon light-emitting-diode sub-mount by a hybrid nanosecond laser drilling strategy | Tang, C.-W.; Li, K.-M.; Yang, M.; Liao, H.-C.; Young, H.-T.; HONG-TSU YOUNG ; KUAN-MING LI | Microelectronics Reliability | | | |
2012 | Improving the sidewall quality of nanosecond laser-drilled deep through-silicon vias by incorporating a wet chemical etching process | Tang, C.-W.; Li, K.-M.; Young, H.-T.; HONG-TSU YOUNG ; KUAN-MING LI | Micro and Nano Letters | | | |
2022 | Industrial Anomaly Detection with Skip Autoencoder and Deep Feature Extractor | Tang, Ta Wei; Hsu, Hakiem; Huang, Wei Ren; KUAN-MING LI | Sensors | 2 | 3 | |
2023 | An innovative integrated approach to automatic defect detection system of cell phone case manufacturing in an empirical implementation | Liao, Chao Chang; Hsu, Chih Ching; HONG-TSU YOUNG ; KUAN-MING LI | Journal of Intelligent Manufacturing | 0 | 0 | |
2012 | Innovative through-silicon-via formation approach for wafer-level packaging applications | Tang, C.W.; Young, H.T.; Li, K.M.; Tang, Chao Wei; Young, Hong Tsu; Li, Kuan Ming; HONG-TSU YOUNG ; KUAN-MING LI | Journal of Micromechanics and Microengineering | | | |
2021 | Integrating object detection and image segmentation for detecting the tool wear area on stitched image | Lin W.-J; Chen J.-W; Jhuang J.-P; Tsai M.-S; Hung C.-L; Li K.-M.; KUAN-MING LI | Scientific Reports | 10 | 7 | |
2015 | Investigation of silicon-based light emitting diode sub-mounts: Enhanced performance and potential for improved reliability | HONG-TSU YOUNG ; KUAN-MING LI | Materials Science in Semiconductor Processing | 3 | 3 | |
2022 | Laser surface modification on rGO/ZnO composite materials for NO2 gas sensing | Lin, Che Shu; Hsieh, Hsin Fang; CHIEN-FANG DING ; KUAN-MING LI ; HONG-TSU YOUNG ; Hsiao, Wen Tse | Materials Chemistry and Physics | 5 | 5 | |
2017 | Low-cost camera based laser power monitoring and stabilizing for micro-hole drilling | Ding C.-F. ; Lee M.-S.; KUAN-MING LI | International Journal of Precision Engineering and Manufacturing | 7 | 7 | |
2017 | A miniaturized nickel oxide thermistor via aerosol jet technology | Wang C.; Hong G.-Y.; Li K.-M.; KUAN-MING LI ; HONG-TSU YOUNG | Sensors (Switzerland) | 26 | 20 | |
2007 | Modeling of cutting forces in near dry machining under tool wear effect | KUAN-MING LI | International Journal of Machine Tools and Manufacture | 74 | 62 | |
2006 | Modeling of cutting temperature in near dry machining | KUAN-MING LI | Journal of Manufacturing Science and Engineering | 57 | 46 | |
2007 | Modeling of Flank Wear in Near Dry Turning under Built-up Edge Effect | Kuan-Ming Li; KUAN-MING LI | Proceedings of 2nd International Forum on Systems and Mechatronics | | | |
2019 | On the Thermal Memory Effect Reduction of Power Amplifiers Using Pulse Modulation | Wang T.-H.; Chen Y.-H.; Chang C.-W.; Li K.-M.; Chen J.-H. ; Staudinger J.; KUAN-MING LI | IEEE Microwave and Wireless Components Letters | | | |
2014 | Optimization of micromilling microchannels on a polycarbonate substrate | Chen, P.-C.; Pan, C.-W.; Lee, W.-C.; Li, K.-M.; KUAN-MING LI | International Journal of Precision Engineering and Manufacturing | | | |
2015 | Parameter optimization of micromilling brass mold inserts for microchannels with Taguchi method | Chen, P.-C.; Chen, Y.-C.; Pan, C.-W.; Li, K.-M.; KUAN-MING LI | International Journal of Precision Engineering and Manufacturing | | | |
2007 | Performance profiling of minimum quantity lubrication in machining | Li, K.-M.; Liang, S.Y.; KUAN-MING LI | International Journal of Advanced Manufacturing Technology | | | |
2007 | Predictive modeling of flank wear in turning under flood cooling | Li, K.-M.; Liang, S.Y.; KUAN-MING LI | Journal of Manufacturing Science and Engineering | | | |
2005 | Predictive models for flank wear in near dry machining | Li, K.-M.; Liang, S.Y.; KUAN-MING LI | American Society of Mechanical Engineers, Manufacturing Engineering Division | | | |