第 1 到 102 筆結果,共 102 筆。
公開日期 | 標題 | 作者 | 來源出版物 | scopus | WOS | 全文 | |
---|---|---|---|---|---|---|---|
1 | 1999 | 裂紋填充在疲勞裂紋止裂之探討(1/2) | 單秋成 | ||||
2 | 1999 | A modified model for the estimation of fatigue life derived from random vibration theory | Liou, H. Y.; Wu, W. F.; 單秋成(CHOW-SHING SHIN) | Probabilistic Engineering Mechanics | 0 | 0 | |
3 | 1999 | Fatigue crack propagation in the elastic-plastic regime in a low alloy structural steel | Shin, C.-S.; Li, R.-Z.; CHOW-SHING SHIN | Journal of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
4 | 1999 | A novel method for repairing fatigue crack | CHOW-SHING SHIN | Journal of Structural Engineering (Madras) | |||
5 | 1999 | Fatigue Crack Propagation in the Elastic-plastic Regime in a Low Alloy Structural Steel | SHIN CS ; Li; R. Z. | Fracture Mechanics and Fatigue Special Issue of the Journal of the Chinese Institute of Engineers | |||
6 | 1999 | A Novel Method For Repairing Fatigue Crack; Recent Developments in Fatigue and Fracture Mechanics-based Analysis and Design of Structures | SHIN CS ; Chen, Z. Z. | Journal of Structural Engineering | |||
7 | 1999 | 經使用劣化後Gr/PEEK複合材料之修補─子計畫三:含缺陷 Gr/PEEK 複材修補後之機械性質探討(I) | 單秋成 | ||||
8 | 1999 | 疲勞裂縫自動量測系統之發展 | 單秋成 ; 王俊博 | 檢測科技 | |||
9 | 1999 | Modified model for the estimation of fatigue life derived from random vibration theory | Liou H.Y.; Wu W.F ; CHOW-SHING SHIN | Probabilistic Engineering Mechanics | 38 | 32 | |
10 | 1999 | 在3.5%鹽水中形成裂縫間氧化物對疲勞裂縫生長之影響 | 周漢興; 單秋成 ; 宋佩瑄; 許伯秋; 張力 | 中正嶺學報 | |||
11 | 1998 | Mechanical properties of a low temperature cured ceramic matrix composite | SHIN CS ; Wang, J. B. | Materials Chemistry and | |||
12 | 1998 | Effect of artificial closure materials on crack growth retardation | Song, P.S.; Hwang, S.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
13 | 1998 | 熱塑性及熱固性複合材料組件疲勞與破壞之分析與評估(III)─子計畫三:熱塑性及熱固性複合材料受溫度循環及衝擊後之疲勞破壞機制探討與壽命分析 | 單秋成 | ||||
14 | 1998 | Fatigue damage repair by artificial introduction of crack closure | Shin, C.S.; Huang, K.C.; Li, R.Z.; CHOW-SHING SHIN | Key Engineering Materials | |||
15 | 1998 | 疲勞破壞修補之探討 | 單秋成 | ||||
16 | 1998 | Fatigue damage repair by artificial introduction of crack closure | Shin, C. S.; Huang, K. C.; Li, R. Z.; CHOW-SHING SHIN | Fracture and Strength of Solids, Pts 1 and 2: Pt 1: Fracture Mechanics | |||
17 | 1998 | Effect of artificial closure materials on crack growth retardation | Song, P. S.; Hwang, S.; SHIN CS | Engineering Fracture Mechanics | |||
18 | 1998 | Artificial retardation of fatigue crack growth by the infiltration of cracks by foreign materials | SHIN CS ; Huang, K. C.; Li, R. Z. | Fatigue & Fracture of Engineering Materials & Structures | |||
19 | 1998 | Mechanical properties of a low-temperature-cured ceramic matrix composite | CHOW-SHING SHIN | Materials Chemistry and Physics | |||
20 | 1998 | Artificial retardation of fatigue crack growth by the infiltration of cracks by foreign materials | Shin, C.S.; Huang, K.C.; Li, R.Z.; CHOW-SHING SHIN | Fatigue and Fracture of Engineering Materials and Structures | |||
21 | 1997 | On the elastic longitudinal stress estimation in the neighbourhood of notches | Kujawski, D.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
22 | 1997 | 氧化鋁─NIAL 複合材料之開發研究─子計畫四:AL2O3─NIAL 複合材料之機械性質研究 | 單秋成 | ||||
23 | 1997 | 熱塑性及熱固性複合材料組件疲勞與破壞之分析及評估(II)─子計畫三:熱塑性及熱固性複合材料受溫度循環及衝擊後之疲勞破壞機制探討與壽命分析 | 單秋成 | ||||
24 | 1996 | 熱塑性與熱固性複合材料受溫度循環及溫度衝擊後之疲勞破壞機制探討與壽命分析 | 單秋成 | ||||
25 | 1996 | A12O3/NiA1複合材料之機械性質研究 | 單秋成 ; Shin, Chow-Ching | ||||
26 | 1996 | Effects of anisotropy on the hydrogen diffusivity and fatigue crack propagation of a banded ferrite/pearlite steel | Tau, L.; Chan, S.L.I.; CHOW-SHING SHIN | Hydrogen Effects in Materials | |||
27 | 1996 | Continuous Service Reassurance of Steam Turbine Blades | CHOW-SHING SHIN | Engineering Failure Analysis | |||
28 | 1996 | Hydrogen enhanced fatigue crack propagation of bainitic and tempered martensitic steels | Tau, L.; Chan, S.L.I.; CHOW-SHING SHIN | Corrosion Science | |||
29 | 1996 | Fatigue damage repair: A comparison of some possible methods | Shin, C.S.; Wang, C.M.; Song, P.S.; CHOW-SHING SHIN | International Journal of Fatigue | |||
30 | 1996 | Enhancement in fatigue life through electroplated nickel-induced crack closure | Song, Pey-Shiuan; Hwang, Shin; Shin, Chow-Shing; CHOW-SHING SHIN | Journal of the Chinese Society of Mechanical Engineers, Series C/Chung-Kuo Chi Hsueh Kung Ch'eng Hsuebo Pao | |||
31 | 1996 | 熱塑性及熱固性複合材料組件疫勞與破壞之分析及評估─熱塑性與熱固性複合材料組件疲勞與破壞之分析與評估-子計畫三:熱塑性與熱固性複合材料受溫度循 | 單秋成 | ||||
32 | 1996 | 氧化鋁-NiAl複合材料之開發研究─Al2O3-NiAl複合材料之開發研究子計畫四:A1203-NiAl複合材料之機械性質研究 | 單秋成 | ||||
33 | 1995 | 疲勞裂縫之修補與現場修補系統之開發(II) | 單秋成 | ||||
34 | 1995 | 隨機負荷下鋼鐵在充氫環境中腐蝕疲勞之研究 | 陳立業; 單秋成 | 防蝕工程 | |||
35 | 1994 | Effects of Anisotropy on the Hydrogen Induced Fatigue Propagation of a Banded Ferrite/Pearlite Steel | Chan, S. L. I.; Tau L.; 單秋成 ; Shin, Chow-Ching | The 12th International Corrosion Congress | |||
36 | 1994 | 高強度低合金鋼之低週疲勞累積破損分析 | 黃玉寶; 陳興民; 單秋成 ; 王建義; 楊春欽 | 中華民國第三屆破壞科學研討會 | |||
37 | 1994 | An Investigation on Various Infiltration Methods for Fatigue Crack Repair | Song, P. S.; Wong, C. M.; 單秋成 ; Shin, Chow-Ching | The 1994 Far East Conference on NDT and ROCSNT 9th Annual Conference | |||
38 | 1994 | Experimental and analytical fracture assessment of 165mm diameter AISI 304 seamless piping containing circumferential through-walled crack | C. S. Shin; R. P. Tseng; W.T. Jao; CHOW-SHING SHIN | The International Journal of Pressure Vessels and Piping | |||
39 | 1994 | Experimental calibration of stress intensity factor for piping with cirucumferential through-wall crack | C. S. Shin; C.M. Wang; CHOW-SHING SHIN | The International Journal of Pressure Vessel and piping | |||
40 | 1994 | A practical method to estimate the stress concentration of notches | Shin, C.S.; Man, K.C.; Wang, C.M.; CHOW-SHING SHIN | International Journal of Fatigue | |||
41 | 1994 | Probabilistic analysis of fatigue crack propagation under random loading | Wu, W.-F.; Shin, C.S.; Shen, J.-J.; CHOW-SHING SHIN | Journal of Pressure Vessel Technology | |||
42 | 1994 | A Practical method to estimate the stress concentration factors of notches | C. S. Shin; K. C. Man; C.M. Wang; CHOW-SHING SHIN | The International Journal of Fatigue | |||
43 | 1994 | Experimental and analytical fracture assessment of 165-mm diameter AISI 304 seamless piping containing a circumferential through-wall crack | Shin, C.S.; Tseng, R.P.; Jao, W.T.; CHOW-SHING SHIN | International Journal of Pressure Vessels and Piping | |||
44 | 1994 | The effect of infiltration induced crack closure on crack growth retardation | Sheu, B.C.; Song, P.S.; CHOW-SHING SHIN | Scripta Metallurgica et Materiala | |||
45 | 1994 | 疲勞裂縫之修補與現場修補系統之開發 | 單秋成 | ||||
46 | 1994 | Experimental calibration of stress intensity factor for piping with circumferential through-wall crack | Shin, C.S.; Wang, C.M.; CHOW-SHING SHIN | International Journal of Pressure Vessels and Piping | |||
47 | 1994 | Effects of Anisotropy on the Hydrogen Induced Fatigue Crack Propagation of a Banded Ferrite/Pearlite Steel | Tau, L.; Chan, S. L. I.; 單秋成 ; Shin, Chow-Ching | Journal of Marine Science and Technology | |||
48 | 1994 | A Study on Possible Fatigue Crack Repair Methods | SHIN CS ; 單秋成 ; Shin, Chow-Ching | Fracture Mechanics for Hydroelectric Power System Symposium '94 | |||
49 | 1994 | Fatigue Crack Growth from Stress Concentrations and Fatigue Life Prediction in Notched Components | 單秋成 ; Shin, Chow-Ching | Handbook of Fatigue Crack Propagation in Metallic Structures | |||
50 | 1994 | A reliability assessment of reactor pressure vessels | Wu W.F ; Shin C.S. ; Tsai C.H. | International Journal of Pressure Vessels and Piping | 1 | 1 | |
51 | 1994 | 隨機負荷下之疲勞裂縫延伸與疲勞可靠度分析 | 吳文方(W. F. Wu); 單秋成(C. S. Shin); 陳宗權(T. C. Chen); 陳弘毅(H. Y. Chen); 單秋成 | 中國航空太空學會學刊 | |||
52 | 1993 | 隨機負荷下之疲勞裂縫延伸與疲勞可靠度分析(Ⅱ) | 吳文方 ; 單秋成 ; 陳文平; 黃敏豪; Wu, Wen-Fang | ||||
53 | 1993 | 壓應力疲勞預裂與陶電斷裂韌性探討 | 單秋成 ; 蔣榮德 | ||||
54 | 1993 | An Experimental Study and Reliability Analysis of Fatigue Crack Propagation under Random Loading | 吳文方 ; 單秋成 ; Shen, Jyh-Jeng; Wu, Wen-Fang ; Shin, Chow-Ching | The 6th of International Conference on Structural Safety and Reliability | |||
55 | 1993 | An improved dc potential drop system for crack length measurement | Shin, C.-S.; Huang, W.-H.; Chen, H.-Y.; CHOW-SHING SHIN | Journal of the Chinese Institute of Engineers, Transactions of the Chinese Institute of Engineers,Series A/Chung-kuo Kung Ch'eng Hsuch K'an | |||
56 | 1993 | On the mechanisms and behaviour of overload retardation in AISI 304 stainless steel | Shin, C.S.; Hsu, S.H.; CHOW-SHING SHIN | International Journal of Fatigue | |||
57 | 1993 | Engineering Assessment Methods in the Prediction of Elastic-Plastic Fracture Behaviour | 單秋成 ; Wu, P. L.; Jao, W. T.; Shin, Chow-Ching | The Journal of the Chinese Society of Mechanical Engineers | |||
58 | 1992 | Approximate Calculation of Stress Concentration Factor and Stress Distribution Ahead of Notches | Wong, T. M.; Man, K. C.; 單秋成 ; Shin, Chow-Ching | Ninth National Corference on Mechanical Engineering, the Chinese Society of Mechanical Engineers | |||
59 | 1992 | 壓應力疲勞預裂與陶瓷斷裂韌性探討 | 單秋成 ; 徐鵬凱 | ||||
60 | 1992 | 管材斷裂及疲勞特性探討 | 單秋成 ; 曾瑞鵬 | ||||
61 | 1992 | 陶瓷材料斷裂韌性測試方法之探討 | 單秋成 ; 徐鵬凱; 韋文誠 ; Wei, Wen-Cheng | 中華民國第二屆破壞科學研討會論文集 | |||
62 | 1992 | 帶狀組織及夾雜物對疲勞裂縫成長速率影響之研究 | 陶霖; 陳立業; 單秋成 | 中國材料科學學會81年年會論文集 | |||
63 | 1992 | A Re-Appraisal of the Net Section Plastic Collapse Method in the Assessment of Elastic-Plastic Fracture | 單秋成 ; Jao, W. T.; Wu, P. L.; Shin, Chow-Ching | The Journal of the Chinese Society of Mechanical Engineers | |||
64 | 1992 | Fatigue life extension by an artificially induced retardation mechanism | Shin, C.S.; Hsu, S.H.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
65 | 1992 | 拉伸超載後疲勞裂縫封閉行為量測方法之探討 | 單秋成 ; 徐森煌 | 中華民國力學學會期刊 | |||
66 | 1992 | Fracture and Fatigue Life Analysis of a Low Pressure Stage Turbine Blade | 單秋成 ; Lee, T. K.; Shin, Chow-Ching | Second Symposium on Fracture Science, the Chinese Society of Materials Science | |||
67 | 1992 | Fracture Toughness Testing of Ceramic Materials | 韋文誠 ; SHIN CS ; Hsu, P. H.; Wei, Wen-Cheng | Conference of Fracture Mechanics | |||
68 | 1991 | 疲勞裂縫延伸受高峰應力影響後之減速現象(II) | 單秋成 ; 徐林煌; 楊博昌 | ||||
69 | 1991 | 管材斷裂實驗能力建立及管材斷裂特性探討 | 單秋成 | ||||
70 | 1991 | 隨機負荷下之疲勞裂縫延伸與疲勞可靠度分析 | 吳文方 ; 單秋成 ; 黃文翰; 沈致正; 楊博昌; Wu, Wen-Fang | ||||
71 | 1991 | 疲勞裂縫延伸受高峰應力影響後之減速現象 | 單秋成 | ||||
72 | 1991 | 高峰拉伸負載後疲勞封閉行為量測方法之探討 | 單秋成 ; 徐森煌 | 中國機械工程學會第八屆學術研討會論文集 | |||
73 | 1991 | A Re-Appraisal of the Net Section Plastic Collapse Method in the Assessment of Elastic-Plastic Fracture | 單秋成 ; Jao, W. T.; Wu, P. L.; Shin, Chow-Ching | Eigth National Conference on Mechanical Engineering, the Chinese Society of Mechanical Engineers | |||
74 | 1991 | Some aspects of corner fatigue crack growth from holes | CHOW-SHING SHIN | International Journal of Fatigue | |||
75 | 1991 | The Stress Intensity Factors of Corner Cracks Emanating from Holes | 單秋成 ; Shin, Chow-Ching | Engineering Fracture Mechanics | |||
76 | 1990 | 彈塑性破壞工程評估方法研究 | 單秋成 | ||||
77 | 1990 | 電廠壽命延長評估 | 單秋成 | 材料與社會 | |||
78 | 1990 | The stress intensity of corner cracks emanating from holes | CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
79 | 1990 | The Fatigue and Fracture of a Zine Die Casting Alloy | 單秋成 ; Fleck, N. A.; Shin, Chow-Ching | International Journal of Fatigue | |||
80 | 1990 | Failure Analysis:Principles and Case Studies | 單秋成 ; Shin, Chow-Ching | ||||
81 | 1989 | Fatigue and fracture of a zinc die casting alloy | Shin, C.S.; Fleck, N.A.; CHOW-SHING SHIN | International Journal of Fatigue | |||
82 | 1989 | A Comparison of Various Stress Intensity Factor Extraction Methods from Finite Element Stress Analysis | Chen, L. S.; 單秋成 ; Shin, Chow-Ching | MRL Bulletin of Research & Development, Materials Research Laboratories | |||
83 | 1988 | 深一機壽命評估與延長 | 單秋成 ; 洪健龍; 陳志冠; 吳耀輝; 張木柱; 蕭乾道 | ||||
84 | 1988 | 火力電廠壽命延長評估 | 單秋成 ; 吳耀輝; 吳志明; 蕭乾道; 張朝成; 顏宏儒; 陳志冠; 張木柱 | ||||
85 | 1988 | The Degradation of Cr-Mo-V Rotor Steel | Shih, C. Y.; Chen, C. K.; 單秋成 ; Chang, L.; Shin, Chow-Ching | Electricity-the Energy for Future Progresser | |||
86 | 1988 | FATIGUE CRACK GROWTH BEHAVIOUR OF A ZINC?ALUMINIUM ALLOY AT HIGH HOMOLOGOUS TEMPERATURES | Shin, C.S.; Smith, R.A.; CHOW-SHING SHIN | Fatigue & Fracture of Engineering Materials & Structures | |||
87 | 1988 | Fatigue crack growth at stress concentrations-the role of notch plasticity and crack closure | Shin, C.S.; Smith, R.A.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
88 | 1988 | EXPERIMENTAL METHOD TO EVALUATE THE STRESS INTENSITY OF CORNER CRACKS. | Shin, C.S.; Chen, C.K.; CHOW-SHING SHIN | MRL bulletin of research and development | |||
89 | 1988 | SOME OBSERVATIONS ABOUT THE SIZE EFFECT IN THE FATIGUE OF NOTCHED SPECIMENS. | CHOW-SHING SHIN | MRL bulletin of research and development | |||
90 | 1987 | Fatigue Crack Growth Behaviour of a Zinc-Aluminium Alloy at High Homologous Temperatures | 單秋成 ; Smith, R. A.; Shin, Chow-Ching | Fatigue & Fracture of Engineering Materials & Structures | |||
91 | 1987 | Size Effect in the Fatigue of Notched Specimens:An Investigation from the Crack Propagation Point of View | 單秋成 ; Shin, Chow-Ching | Morris Cohen Symposium on Metallurgy | |||
92 | 1987 | Some observations about the size effect in the fatigue of notched specimens | CHOW-SHING SHIN | Scripta Metallurgica | |||
93 | 1987 | OVERLOAD RETARDATION IN A STRUCTURAL STEEL | Shin, C.S.; Fleck, N.A.; CHOW-SHING SHIN | Fatigue & Fracture of Engineering Materials & Structures | |||
94 | 1987 | The Stress Intensity Factors of Corner Cracks | 單秋成 ; Chen, C. K.; Shin, Chow-Ching | Annual Conference of Chinese Society for Materials Science | |||
95 | 1986 | Fatigue Analysis and Control | 單秋成 ; Shin, Chow-Ching | ||||
96 | 1986 | Overload Retardation in a Structural Steel | Shin, C.S.; Fleck, N.A.; CHOW-SHING SHIN | Fatigue and Fracture of Engineering Materials and Structures | |||
97 | 1986 | A discussion on various estimations of elastic stress distributions and stress concentration factors for sharp edge notches | CHOW-SHING SHIN | International Journal of Fatigue | |||
98 | 1985 | 不等振幅疲勞特性探討 | 單秋成 | ||||
99 | 1985 | Fatigue crack growth under compressive loading | Fleck, N.A.; Shin, C.S.; Smith, R.A.; CHOW-SHING SHIN | Engineering Fracture Mechanics | |||
100 | 1985 | Fatigue crack growth from sharp notches | Shin, C.S.; Smith, R.A.; CHOW-SHING SHIN | International Journal of Fatigue | |||
101 | 1985 | Stress Intensity Factors for Cracks Emanating from Notches | 單秋成 ; Smith, R. A.; Shin, Chow-Ching | International Symposium on Microstructure and Mechanical Behaviour of Materials | |||
102 | 1983 | Fatigue Properties of Anneal Hardened Cu-30Zn | 單秋成 ; Shin, Chow-Ching |