https://scholars.lib.ntu.edu.tw/handle/123456789/407485
標題: | Reaction sintering and characterization of lead magnesium niobate relaxor ferroelectric ceramics | 作者: | Lu C.-H. Chang D.-P. |
公開日期: | 2000 | 卷: | 11 | 期: | 4 | 起(迄)頁: | 363-367 | 來源出版物: | Journal of Materials Science: Materials in Electronics | 摘要: | The formation and densification of Pb(Mg1/3Nb2/3)O3 ceramics prepared by reaction sintering have been investigated. Two kinds of lead sources. PbO and Pb3O4 are used as the starting materials for Pb(Mg1/3Nb2/3)O3. During heating processes, the specimens first expand while the pyrochlore phase is formed. At elevated temperatures, the formation and rapid sintering of Pb(Mg1/3Nb2/3)O3 occur simultaneously. The starting materials of the Pb3O4 system exhibit better reactivity and sinterability than those of the PbO system. With Pb3O4 as the starting material, monophasic Pb(Mg1/3Nb2/3)O3 ceramics with high sintering density are successfully achieved by reaction sintering at as low as 900 ¢XC. While for the PbO system, pure perovskite phase could not be synthesized because of the existence of residual pyrochlore phase, and the ceramics obtained have low sintering density. The dielectric permittivity of the Pb(Mg1/3Nb2/3)O3 ceramics obtained in the Pb3O4 system is higher than that in the PbO system. This is attributed to the formation of pure perovskite phase and high sintering density in the former system. |
URI: | https://scholars.lib.ntu.edu.tw/handle/123456789/407485 | ISSN: | 09574522 | DOI: | 10.1023/A:1008941718758 |
顯示於: | 化學工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。