|Title:||Tuning of PI/PID controllers based on specification on maximum closed-loop amplitude ratio||Authors:||Chen C.-L.
|Keywords:||Amplitude Ratio;Internal Model Control;PID Controller;Process Control;Tuning||Issue Date:||1999||Journal Volume:||32||Journal Issue:||6||Start page/Pages:||783-788||Source:||Journal of Chemical Engineering of Japan||Abstract:||
A simple PI/PID controller tuning formula is presented in this article, where the maximum closed-loop amplitude ratio in the frequency domain is set to +2 dB, a value recommended by Luyben (1990) for considering performance robustness. A first-order-plus-dead-time (FOPDT) model or a second-order-plus- dead-time (SOPDT) model is first identified for process dynamics. The PI/PID settings for the FOPDT/SOPDT models are then derived based on the internal model control (IMC) principle. The robustness parameter left for adjusting in the IMC tuning is determined according to the specified value of maximum closed-loop magnitude. Several testing processes with an extensive variety of dynamic characteristics are used, demonstrating the effectiveness and robustness of the proposed tuning method on typical processes. Copyright ? 1999 The Society of Chemical Engineers.
|Appears in Collections:||化學工程學系|
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.