A study of Ti50-x/2Ni40-x/2Cu10Cr x (x = 0 ? 1 at.%) shape memory alloys
Journal
Journal of Alloys and Compounds
Journal Volume
386
Journal Issue
1-2
Pages
157-164
Date Issued
2005
Author(s)
Abstract
The martensitic transformation, shape memory (SME), superelasticity (SE) and cold-rolling effect of Ti50-x/2Ni40-x/2Cu 10Crx (x = 0, 0.2, 0.6, 1.0) alloys have been studied. Experimental results reveal that the Ti50-x/2Ni 40-x/2Cu10Crx (x= 0, 0.2, 0.6, 1.0) alloys exhibit a B2 ↔ B19 ↔ B19 two-stage martensitic transformation. Their transformation temperatures are decreased due to the Cr addition, but the specimen hardness and shape recovery increase with increasing Cr content. The Ti50-x/2Ni40-x/2Cu10Crx alloys can also exhibit an excellent superelasticity. The σSIM stress increases with raising test temperature, but the σSIM stress and stress hysteresis decrease with increasing deformation cycles. For the cold-rolled Ti49.7Ni39.7Cu10Cr0.6 specimen, the M*1 (A*1) temperatures are found to decrease with increasing amount of cold rolling and the M* 2 (A*2) peaks are not even observed in the DSC measurement. More B2 parent phase can be observed after cold rolling at room temperature. This phenomenon is ascribed to the formation of SIP B2 phase and/ or the depression of forward B2 → B19 transformation due to the dislocations introduced during rolling process. Meanwhile, the superelasticity curves show that the stress hysteresis increases with increasing amount of cold rolling. The superelasticity curves show that the stress hysteresis increases with increasing amount of cold rolling. © 2004 Elsevier B.V. All rights reserved.
Type
journal article