Combustion characteristics of premixed propane flame with added H2 and CO on a V-shaped impinging burner
Journal
International Journal of Hydrogen Energy
Journal Volume
40
Journal Issue
2
Pages
1244-1255
Date Issued
2015
Author(s)
Abstract
The combustion characteristics of H2/C3H8/air and CO/C3H8/air premixed flames on a V-shaped burner have been investigated experimentally for future blended fuels with flow visualization, chemiluminescence and analysis of exhaust gases. The lean flammability of H2/C3H8/air is expanded to 0.38 and that of CO/C3H8/air is expanded to 0.50 on the V-shaped burner. The flame configurations, flow structures, distributions of chemiluminescence intensity of CH∗ and OH∗, flame temperatures and CO emissions under varied mixture conditions were recorded during the combustion. Two flame configurations were observed - of types M and hill. The addition of H2 and CO to the fuel altered the flame pattern from hill-type to M-type (shorter flame) because the burning velocity, temperature and flame intensity increased with the addition of H2 and CO in the fuel. Analysis of flow visualization and chemiluminescence revealed the impinging effect, in which the collision of mixture jets decreases the main flow velocity and increases the residence time. It results in a greatly decreased leakage of the unburned mixture with accumulated heat acting as a well stirred combustible mixture for improved flame stabilization. At = 0.6, the flame temperature of H2/C3H8/air with M-type flame is 1.37 times that of CO/C3H8/air with hill-type flame, while the C3H8/air flame is extinguished. The combustion of CO that occurs in the impinging region resulted in decreased CO emissions when the addition of CO to the fuel surpassed 73.7%. These findings about the combustion characteristics, mechanisms and effects of fuel variability provide industries with an effective concept of burning blended fuels, and are applicable to syngas combustion.
Type
journal article