Improving the removal efficiency of fine particulate matters in air pollution control devices: Design and performance of an electrostatic aerosol particle agglomerator
Journal
Journal of the Taiwan Institute of Chemical Engineers
Journal Volume
107
Pages
110-118
Date Issued
2020
Author(s)
Abstract
Removing submicron particles in the size range from 0.1 to 1.0 µm from gas streams is difficult because they cannot be efficiently captured neither through inertial separation nor by diffusion utilized in air pollution control devices. Electrostatic agglomeration is an effective and practical method for improving the removal efficiency of fine particulate matters. For optimizing the performance of electrostatic agglomerators, in addition to the intensity and frequency of an alternating electric field and the particle residence time, an electrostatic aerosol particle agglomerator was designed and established to experimentally evaluate the influence of particle charges on its performance in this study. The results demonstrate that the performance of the electrostatic aerosol agglomerator can be greatly improved in terms of increasing the particle charges from 9 to 19 (e−/particle). Combined with the low frequency of an AC electric field, the agglomeration efficiency can be further enhanced. The highest agglomeration efficiency of 40.2% is achieved in the submicron size range at AC frequency of 45 Hz. Furthermore, the oscillating distance (cm/Hz) is proposed and estimated for correlating the agglomeration efficiency under various testing conditions. It was found that the agglomeration efficiency can be described by a simple power-law equation using this parameter.
Type
journal article