https://scholars.lib.ntu.edu.tw/handle/123456789/581082
DC 欄位 | 值 | 語言 |
---|---|---|
dc.contributor.author | Fan N.C | en_US |
dc.contributor.author | Chen Y.Y | en_US |
dc.contributor.author | Chen K.Y | en_US |
dc.contributor.author | Wei W.C.J | en_US |
dc.contributor.author | Liu B.H | en_US |
dc.contributor.author | Wang A.B | en_US |
dc.contributor.author | REN-CHYUAN LUO | en_US |
dc.date.accessioned | 2021-09-02T00:07:15Z | - |
dc.date.available | 2021-09-02T00:07:15Z | - |
dc.date.issued | 2017 | - |
dc.identifier.issn | 12299162 | - |
dc.identifier.uri | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85037060535&partnerID=40&md5=6a66c773e9f9ba636158f6b19225a028 | - |
dc.identifier.uri | https://scholars.lib.ntu.edu.tw/handle/123456789/581082 | - |
dc.description.abstract | A disk-shaped ceramic catalyst made by 3D printing (3DP) is used to reform syngas. We select two Al2O3 powders (α-and high-surface-area θ-Al2O3) and polymeric binders for preparing the 3DP feedstock. Catalyst stacked Al2O3 disks are made by kneading the polymers with ceramic powders and extruding to produce filaments, which are melted and used for 3D additive manufacturing (AM). The processing parameters (sequence of addition, viscosity of the feedstock, etc.), the phase transformation of the θ-powder, and catalytic properties of the made carrier are examined. The made alumina disks were densified to a relative density (RD) of 40% ?65%. Two porous disks were coated with catalyst NiO and CeO2, and used to reform syngas made from waste paper. The best case reforms the CH4 content in the syngas from 25.7% down to 0.15% or lower. The reformed gaseous fuel is suitable for solid oxide fuel cells (SOFCs). ? 2017, Hanyang University. All rights reserved. | - |
dc.relation.ispartof | Journal of Ceramic Processing Research | - |
dc.title | Porous Al2O3 catalyst carrier by 3D additive manufacturing for syngas reforming | en_US |
dc.type | journal article | en |
dc.identifier.scopus | 2-s2.0-85037060535 | - |
dc.relation.pages | 676-682 | - |
dc.relation.journalvolume | 18 | - |
dc.relation.journalissue | 9 | - |
item.openairetype | journal article | - |
item.fulltext | no fulltext | - |
item.openairecristype | http://purl.org/coar/resource_type/c_6501 | - |
item.grantfulltext | none | - |
item.cerifentitytype | Publications | - |
crisitem.author.dept | Electrical Engineering | - |
crisitem.author.dept | International Center of Excellence on Intelligent Robotics and Automation Research (NTU-iCeiRA) | - |
crisitem.author.parentorg | College of Electrical Engineering and Computer Science | - |
crisitem.author.parentorg | Others: International Research Centers | - |
crisitem.author.parentorg | Others: University-Level Research Centers | - |
顯示於: | 電機工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。