https://scholars.lib.ntu.edu.tw/handle/123456789/597972
標題: | Maximum shear strength of reinforced concrete deep beams | 作者: | Hwang S.-J Yang Y.-H Li Y.-A. SHYH-JIANN HWANG |
關鍵字: | Deep beam;Force-transfer mechanism;Maximum shear strength;Strut-and-tie model;High performance concrete;Reinforced concrete;Shear flow;Tensile strength;Current codes;Force-transfer mechanisms;Inclination angles;Maximum shears;Reinforced concrete deep beams;Shears strength;Tension reinforcement;Tall buildings | 公開日期: | 2021 | 卷: | 118 | 期: | 6 | 起(迄)頁: | 155-164 | 來源出版物: | ACI Structural Journal | 摘要: | Current codes limit the maximum shear strength in reinforced concrete deep beams to prevent possible sudden shear failure due to over-reinforcement. For high-rise buildings, the size of deep beams designed as transfer girders is often limited by the maximum shear strength regulations. This paper suggests that the softened strut-and-tie model can be used to determine the maximum shear strength of the deep beams with a shear span-depth ratio less than 2. It is found that there are three influential parameters of the maximum shear strength for deep beams—that is, strut inclination angle, softened concrete strength, and longitudinal tension reinforcement. Considering the softening phenomenon of cracked reinforced concrete, the use of √fc′ in the ACI 318-19 limiting equation seems appropriate for the high-strength concrete deep beams. However, the ACI 318-19 limit seems to be short of the design parameters of the strut inclination angle and the amount of longitudinal tension reinforcement. Copyright ? 2021, American Concrete Institute. All rights reserved. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85120046415&doi=10.14359%2f51733076&partnerID=40&md5=c593468233d3e7ac0917a05720e55ca6 https://scholars.lib.ntu.edu.tw/handle/123456789/597972 |
ISSN: | 08893241 | DOI: | 10.14359/51733076 |
顯示於: | 土木工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。