https://scholars.lib.ntu.edu.tw/handle/123456789/598958
標題: | Real-time Corner Smoothing Based on FIR Filtering for CNC Machine Tools | 作者: | Tang P.-Y Lin M.-T Tsai M.-S. MENG-SHIUN TSAI |
關鍵字: | corner smoothing;FIR filtering;kinematic constraints;machine tool;real-time;Blending;Computer control systems;Impulse response;Interpolation;Kinematics;Machine tools;CNC machine tools;Corner smoothing;Feedrate;Filtering algorithm;Finite impulse response filtering;Kinematic constraints;Real- time;Smooth trajectories;Smoothing methods;Toolpaths;FIR filters | 公開日期: | 2021 | 起(迄)頁: | 639-644 | 來源出版物: | Proceedings of the 3rd IEEE Eurasia Conference on IOT, Communication and Engineering 2021, ECICE 2021 | 摘要: | This paper proposes a novel corner smoothing method with a Finite Impulse Response (FIR) filtering algorithm to generate a smooth trajectory for CNC machine tools. Basic point-to-point (P2P) interpolation for linear toolpath causes motion stops at each corner and excites structure vibration. Instead of inserting blending spline curves and solving feedrate planning between linear segments, non-stop feed motion is achieved in real-time by using the approach. Based on kinematic equations and pulse commands of motion axes, the length of FIR filtering is determined to respect corner tolerance and kinematic constraints of the drives simultaneously. Rather than adding the dwell time in filter-based feedrate planning, two-axis motion is realized by evaluating corner speed and matching the same length of FIR filters. Simulation studies and experiments results are provided to validate the effectiveness of the presented technique and improve cycle time and contouring performance. ? 2021 IEEE. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85124205377&doi=10.1109%2fECICE52819.2021.9645725&partnerID=40&md5=7618109cb9ef6bfe82033383669790a4 https://scholars.lib.ntu.edu.tw/handle/123456789/598958 |
DOI: | 10.1109/ECICE52819.2021.9645725 |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。