Effects of Flange Size on Dividing Streamlines of Exterior Hoods in Cross Drafts
Journal
Journal of Occupational and Environmental Hygiene
Journal Volume
1
Journal Issue
5
Pages
283-288
Date Issued
2004
Author(s)
Abstract
Effects of flange size on the flow patterns of an exterior circular hood subject to the influence of various uniform cross drafts were studied in an apparatus consisting of hood-model/wind-tunnel assembly. The cross draft to suction velocity ratio covered the range from 0.056 to 0.792. The flange width to hood diameter ratio spanned from 1.2 to 3.0. The hood equipped without flange was also probed. A two-component laser Doppler anemometer was used to measure the velocity field on the symmetry plane. The streamline patterns were obtained from the measured velocity data. The cross draft caused a capture envelope. The boundary of the envelope was described by a dividing streamline. It was found that the flange width presented complex effects on the capture envelope and the dividing streamline. Corresponding to a cross draft to suction velocity ratio, a critical flange width existed. If the flange width was smaller than the critical value, the dividing streamline would terminate at the downstream tip of the flange. The behaviors of the capture envelope and the dividing streamline of the hood in cross draft under different flange widths are presented and discussed.
SDGs
Type
journal article
File(s)![Thumbnail Image]()
Loading...
Name
25.pdf
Size
184.29 KB
Format
Adobe PDF
Checksum
(MD5):22f85c0d3d663b39671e7ee4d713cdba