https://scholars.lib.ntu.edu.tw/handle/123456789/606062
標題: | Strain concentration effects of wood knots under longitudinal tension obtained through digital image correlation | 作者: | Chang C.-W FAR-CHING LIN |
關鍵字: | Fracture initiation point;Knot diameter ratio;Knot tissue;Image analysis;Strain measurement;Tissue;Wood;Artificial holes;Concentration effects;Diameter ratio;Digital image correlations;Fracture initiation;Mechanical effects;Strain concentration;Fracture | 公開日期: | 2021 | 卷: | 212 | 起(迄)頁: | 290-301 | 來源出版物: | Biosystems Engineering | 摘要: | Knots are natural, inevitable structures in wood left by branches. Most of the negative mechanical effects of knots are caused by strain concentration effects and fiber variability. In this study, digital image correlation (DIC) was used to observe the global strain distribution around intergrown knots, encased knots, knotholes, and artificial holes in thin Japanese cedar (Cryptomeria japonica) tangential plates of different sizes subjected to tensile load. The results indicated that the strain around knots is more homogeneous than that around holes, and that the influence of wood anatomy is greater than that of the geometric factors of a hole. Knots have naturally optimized structures for branch junctions, altering wood properties, such as grain angle, microfibril angle, and branch collar, to disperse strain and prevent fractures. The fractures caused by four types of knots or holes differed. The specimens with artificial holes were the most consistent with strain concentration theory, but none of the specimens within the other three natural knots or holes exhibited fractures around knots. Although the strain peak of natural knots occurred at knot edges, this was unrelated to the fractures. Finally, the strain characteristics of the knot tissue revealed that the internal structure of intergrown knots was completely connected with surrounding tissues, meaning that they can deform synchronously with the specimen. By contrast, encased knots tissue exhibited an extremely low modulus in the transverse direction of the specimens (tangent axis of wood) because the strain was higher in the knot tissue than in the surrounding wood. ? 2021 IAgrE |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85119529900&doi=10.1016%2fj.biosystemseng.2021.10.014&partnerID=40&md5=7b40ca54a52839aa9453dc609850eaa4 https://scholars.lib.ntu.edu.tw/handle/123456789/606062 |
ISSN: | 15375110 | DOI: | 10.1016/j.biosystemseng.2021.10.014 |
顯示於: | 森林環境暨資源學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。