https://scholars.lib.ntu.edu.tw/handle/123456789/611688
標題: | Experimental and numerical investigation of a taut-moored wave energy converter: A validation of simulated buoy motions | 作者: | Yang S.-H. Ringsberg J.W. Johnson E. Hu Z. Bergdahl L. Duan F. SHUN-HAN YANG |
關鍵字: | Boundary element method;Buoyancy;Buoys;Damping;Experiments;Finite element method;Mooring;Numerical methods;Numerical models;Ocean currents;Power takeoffs;Sailing vessels;Verification;Wave power;Model validation;Numerical investigations;Operational conditions;Point absorber;Power take-off systems;simulation;Structural response analysis;Wave energy converters;Wave energy conversion | 公開日期: | 2018 | 卷: | 232 | 期: | 1 | 起(迄)頁: | 97-115 | 來源出版物: | Proceedings of the Institution of Mechanical Engineers Part M: Journal of Engineering for the Maritime Environment | 摘要: | This study presents an experimental and numerical investigation of a taut-moored wave energy converter system with a point-absorber type of wave energy converter. The wave energy converter system consists of a buoy, a unique three-leg two-segment mooring system with submerged floaters, and a power take-off system designed for the current experiment as a heave plate. The main objective of the study is to validate a numerical simulation model against experiments carried out in an ocean basin laboratory. Two physical models in model scales 1:20 and 1:36 were built and tested. The detailed experimental testing programme encompasses tests of mooring system stiffness, decay tests, and different sea state conditions for ocean current, regular, and irregular waves. A numerical model in the model scale 1:20 was developed to simulate coupled hydrodynamic and structural response analyses of the wave energy converter system, primarily using potential flow theory, boundary element method, finite element method, and the Morison equation. Several numerical simulations are presented for each part of the experimental testing programme. Results for the wave energy converter buoy motions under operational conditions from the experiments and the numerical simulations were compared. This study shows that the simulation model can satisfactorily predict the dynamic motion responses of the wave energy converter system at non-resonant conditions, while at resonant conditions additional calibration is needed to capture the damping present during the experiment. A discussion on simulation model calibration with regard to linear and non-linear damping highlights the challenge to estimate these damping values if measurement data are not available. ? 2017, ? IMechE 2017. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85042281525&doi=10.1177%2f1475090217735954&partnerID=40&md5=3b0b508b9936f94f1a858ec9c3e1c278 https://scholars.lib.ntu.edu.tw/handle/123456789/611688 |
ISSN: | 14750902 | DOI: | 10.1177/1475090217735954 |
顯示於: | 工程科學及海洋工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。