https://scholars.lib.ntu.edu.tw/handle/123456789/611906
標題: | Development of a simple laser-based 2D contouring accuracy compensation system for the laser cutting machine | 作者: | Huang H.-L. Jywe W.-Y. Cho M.-C. Wen-Yuh Jywe |
關鍵字: | Errors;Feeding;Laser applications;Laser beam cutting;Laser beams;Machine tools;Machinery;Semiconductor lasers;Compensation systems;Contouring accuracy;High-precision position;Laser cutting machine;Moment of inertia;Noncontact measurements;Position sensor detectors;Production yield;Cutting | 公開日期: | 2015 | 卷: | 126 | 期: | 23 | 起(迄)頁: | 3616-3623 | 來源出版物: | Optik | 摘要: | The effect of dynamical contouring error is a critical to the production yield of the laser cutting machine. Dynamical contouring error is defined as the difference between the actual processing path and the commanded path, as implemented by following the command curves of the feeding and driving system associated with the machine tools. Contouring error is the result of various factors, such as the external loads, friction, moment of inertia, feed rate, speed control, and servo control. This study proposes a 2D compensation system to improve the contouring accuracy of the laser cutting machine. An optical method was adopted, in which a stable frequency laser diode and a high precision position sensor detector (PSD) were adopted to perform noncontact measurement. Experimental results demonstrate that the accuracy of the position sensor detector (PSD) in the 2D contouring accuracy compensation system was ±1.5 μm over a calculated range of ±3 mm, representing an improvement accuracy of over 80% at a high feed rate. ? 2015 Elsevier GmbH. All rights reserved. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-84952342752&doi=10.1016%2fj.ijleo.2015.08.244&partnerID=40&md5=b5ea1ff1b2cb6b3f12c480878497e276 https://scholars.lib.ntu.edu.tw/handle/123456789/611906 |
DOI: | 10.1016/j.ijleo.2015.08.244 |
顯示於: | 機械工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。