https://scholars.lib.ntu.edu.tw/handle/123456789/612011
Title: | New methodology for calibrating the volumetric errors of machines for a laser ball bar system | Authors: | Lin C.C. Jywe W.Y. Her J.L. Wen-Yuh Jywe |
Keywords: | Boring machines (machine tools);Computer control systems;Errors;Laser applications;Milling machines;Numerical control systems;Standards;Body diagonal measurement;Laser ball bar systems;Precision machine;Six important lengths;Volumetric errors;Spatial variables measurement | Issue Date: | 2002 | Start page/Pages: | 4/232-4/235 | Source: | Proceedings of the Second International Symposium on Instrumentation Science and Technology | Abstract: | A quick solution for measuring the volumetric errors of a precision machine is presented in this paper. The system requires two plates; one is the base plate including three known points, the other one including three unknown points. The first plate is fixed on a platform and the second one is fixed on the spindle of machine. The two plates are connected with laser ball bars. The spindle is moved toward the diagonal of the working space after all the installation. But the real motions are stepping along the x, y, and the z directions respectively then back to the diagonal line. One complete cycle motion is then completed. In each step movement, there are six important lengths of the laser ball bars are measured. By means of the six lengths and the three known points on the base plate, the three unknown points on the spindle plate can be derived and the volumetric errors at that position are then induced. All the following contents have been submitted to the International Journal of Advanced manufacturing technology in UK. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-0141427658&partnerID=40&md5=d5bd598a182134020ff806bf2c3cc28a https://scholars.lib.ntu.edu.tw/handle/123456789/612011 |
Appears in Collections: | 機械工程學系 |
Items in DSpace are protected by copyright, with all rights reserved, unless otherwise indicated.