https://scholars.lib.ntu.edu.tw/handle/123456789/625383
標題: | Development of a jet trenching model in sand | 作者: | Vanden Berghe J-F Pyrah J Gooding S HERVE CAPART |
公開日期: | 2010 | 起(迄)頁: | 889-894 | 來源出版物: | Frontiers in Offshore Geotechnics II | 摘要: | This paper presents a jet trenching model applicable to realistic jetting configurations that has been developed based on earlier research focussing on idealised jetting configurations (Vanden Berghe, 2008). Specifically, oblique and upright swords featuring multiple jets of different orientations are considered here. The swords are modelled after the jetting swords of the jet trenchers operated by CTC Marine Projects for cable and pipeline burial tasks. The jet trenching model has been validated and calibrated on the basis of a set of laboratory small scale tests. The tests were conducted at scale 1:30 with jetting tools modelled after the swords of CTC jet trencher. The experiment analysed the parameters influencing the trenching performance. It included the total jetting power, the progress rate of the trencher and the sand bed properties. Comparison between laboratory and model results were presented and discussed. The results of this research make it possible to better understand the mechanisms controlling the performances of pipeline burial operations by jet trenching. The proposed model helps the engineers in assessing the performance of the jet trenching machines. © 2011 Taylor & Francis Group, London. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85132372980&partnerID=40&md5=7e2d324902f438e10c49855849eaf8a5 https://scholars.lib.ntu.edu.tw/handle/123456789/625383 |
顯示於: | 土木工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。