dc.relation.reference | [1] M. E. Boyer, T. L. Gall, Metals Handbook, ASM, Desk Edition, Section 16, 1985.
[2] 金屬材料,五南圖書出版股份有限公司,2002,pp. 6.43-6.52。
[3] P. D. Hartung, B. M. Kramer, “Tool Wear in Titanium Machining,” Annals of the CIRP, Vol. 31/1, 1982, pp. 75-80.
[4] J. F. Kahles, M. Field, D. Eylon, F. H. Froes, “Machining of Titanium Alloys,” Journal of Metals, 1985, pp. 27-35.
[5] E. O. Ezugwu, Z. M. Wang, “Titanium Alloys and Their Machinability – a Review,” Journal of Materials Processing Technology, Vol. 68, No. 3, 1997, p 262-274.
[6] A. R. Machado, J. Wallbank, “The Effects of a High-Pressure Coolant Jet on Machining,” Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Vol. 208, No. B1, 1994, pp. 29-38.
[7] Z. Zhao, S. Y. Hong, “Cooling Strategies for Cryogenic Machining from a Materials Viewpoint,” Journal of Materials Engineering and Performance, Vol. 1, No. 5, 1992, pp. 669-678.
[8] S. Y. Hong, Y. Ding, “Cooling Approaches and Cutting Temperatures in Cryogenic Machining of Ti-6Al-4V,” International Journal of Machine Tools & Manufacture, Vol. 41, 2001, pp. 1417-1437.
[9] S. Y. Hong, Y. Ding, W. C. Jeong, “Friction and Cutting Forces in Cryogenic Machining of Ti-6Al-4V,” International Journal of Machine Tools & Manufacture, Vol. 41, 2001, pp. 2271-2285.
[10] M. C. Shaw, Metal cutting principles, Oxford University Press, 1984.
[11] S. Okuyama, Y. Nakamura, S. Kawamura, “Cooling Action of Grinding Fluid in Shallow Grinding,” International Journal of Machine Tools & Manufacture, Vol. 33, No. 1, 1993, pp. 13-23.
[12] J. Kopac, “Influence of Cutting Material and Coating on Tool Quality and Tool Life,” Journal of Materials Processing Technology, Vol. 78, No. 1-3, 1998, pp. 95-103.
[13] P.S. Sreejith, B.K.A. Ngoi, “Dry Machining: Machining of the Future,” Journal of Materials Processing Technology, Vol. 101, No. 1, 2000, pp. 287-291.
[14] A. R. Machado, J. Wallbank, “The Effect of Extremely Low Lubricant Volumes in Machining,” Wear, Vol. 210, No. 1-2, 1997, pp. 76-82.
[15] T. Yamazaki, K. Miki, U. Sato, M. Sato, “Cooling Air Cutting of Ti-6Al-4V Alloy,” Journal of Japan Institute of Light Metals, Vol. 53, No. 10, 2003, pp. 416-420.
[16] A. Ber, M. Glodblatt, “The Influence of Temperature Gradient in Cutting Tool’s Life,” Annals of the CIRP, Vol.38/1, 1989, pp. 69-73.
[17] K. Maekawa, I. Ohshima, R. Murata, “Thermal Analysis of Internally Cooled Cutting Tools,” Journal of the Japan Society of Precision Engineering, Vol. 57, No. 11, 1991, pp. 2011-2016.
[18] K. Maekawa, I. Ohshima, K. Suzuki, “Improvements in Cutting Efficiency of Ti-6Al-6V-2Sn Titanium Alloy (2nd Report) - Investigations for Reducing Tool Tip Temperature,” Journal of the Japan Society for Precision Engineering, Vol. 59, No. 6, 1993, pp. 927-932.
[19] S. B. Billatos, N. A. Basaly., Green Technology and Design for the Environment, Taylor & Francis, 1997, pp. 229-237.
[20] T. C. Jen, G. Gutierrez, S. Eapen, G. Barber, H. Zhao, P. S. Szuba, J. Labataille, J. Manjunathaiah, “Investigation of Heat Pipe Cooling in Drilling Applications. Part I: Preliminary Numerical Analysis and Verification,” International Journal of Machine Tools & Manufacture, Vol. 42, 2002, pp. 643-652.
[21] H. Zhao, G. C. Barber, Q. Zou, “A Study of Flank Wear in Orthogonal Cutting with Internal Cooling,” Wear, Vol. 253, 2002, pp. 957-962.
[22] R. Y. Chiou, S. J. Chen, L. Lu, M. T. North, “The Effect of an Embedded Heat Pipe in a Cutting Tool on Temperature and Wear,” ASME, Heat Transfer Division, Vol. 374, No. 3, 2003, pp. 369-376.
[23] 洪良德,切削刀具學,全華科技圖書股份有限公司,2003,pp. 1.23-1.38。
[24] M. J. Donachie, Titanium:a Technical Guide, Metals Park, ASM International, 1988.
[25] 張永源,“鈦合金加工實務,”機械工業,Vol. 90,1990,pp. 146-153。
[26] N. Narutaki, A. Murakoshi, “Study on Machining of Titanium Alloys,” Annals of the CIRP, Vol.32/1, 1983, pp. 65-69.
[27] P. A.. Dearnley, A. N. Grearson, “Evaluation of Principal Wear Mechanisms of Cemented Carbides and Ceramics Used for Machining Titanium Alloy IMI 318,” Materials Science and Technology, Vol. 2, No. 1, 1986, pp. 47-58.
[28] 依日光,熱管技術理論實務,復漢出版社,1986。
[29] J. E. Deveral, J. E. Kemme, “Satellite Heat Pipe,” USAEC Report LA-3278, Contract W-7405-eng-36, Los Alamos Scientific Laboratory, University of California, 1970.
[30] S. Ramalimggam, P. K. Wright, “Abrasive Wear in Machining: Experiment with Material of Controlled Microstructure,” Journal of Engineering Materials and Technology, Vol. 103, No. 2, 1981, pp. 151-156.
[31] R. Ramaswami, “The Effect of the Build Up Edge (BUE) on the Wear of Cutting Tools,” Wear, Vol. 18, 1971, pp. 1-10.
[32] 范光照,張郭益,精密量測,高立圖書有限公司,2001,pp. 241-268。 | zh_TW |