https://scholars.lib.ntu.edu.tw/handle/123456789/628354
標題: | Modification of gelatin and photocured 3D-printed resin to prepare biomimetic phantoms for ultrasound-guided minimally invasive surgeries | 作者: | Chen, CH Huang, Yi-Fan Chen, PH Hsu, YT FU-SHAN JAW Ho, MH |
關鍵字: | 3D printing; acoustic characteristics; gelatin; phantom; photo-resin; ultrasound-guided minimally invasive surgery; SCANNING ACOUSTIC MICROSCOPY; TISSUE-MIMICKING PHANTOMS; TRABECULAR BONE; CANCELLOUS BONE; COEFFICIENT; FREQUENCY; IMPEDANCE; MUSCLE; LIVER | 公開日期: | 2023 | 出版社: | WILEY | 卷: | 63 | 期: | 2 | 來源出版物: | POLYMER ENGINEERING AND SCIENCE | 摘要: | The main challenge of ultrasound-guided minimally invasive surgeries is to carry out treatments through small boreholes in the patient's body surface with sub-millimetric accuracy and facility offered by ultrasound instruments. Thus, the phantoms' biomimetic appearances, acoustic characteristics, and mechanical properties are essential for healthcare professionals. In this study, gelatin and 3D-printed photo-resin phantoms were developed for hard and soft tissues, respectively. Using glutaraldehyde (GA) and formaldehyde (FA) to crosslink gelatin phantoms, the mechanical strength, ultrasound velocity, acoustic impedance, needle insertion forces, and antiseptic periods were improved, and the addition of silica nanoparticles raised the acoustic impedance. For 3D-printed phantoms, the acoustic impedance ascended with hydrophilic polyethylene glycol diacrylate (PEGDA) oligomers. The additives applied in this study successfully made the gelatin and photo-resin phantoms more mimetic to muscle and bone tissues, allowing their application in preoperative preparations. |
URI: | https://scholars.lib.ntu.edu.tw/handle/123456789/628354 | ISSN: | 0032-3888 | DOI: | 10.1002/pen.26216 |
顯示於: | 醫學工程學研究所 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。