Additive manufacturing of three-dimensional metal-glass functionally gradient material components by laser powder bed fusion with in situ powder mixing
Journal
Additive Manufacturing
Journal Volume
33
Start Page
101113
ISSN
22148604
Date Issued
2020-05
Author(s)
Abstract
Existing commercial three-dimensional (3D) printing systems based on powder bed fusion approach can normally only print a single material in each component. In this paper, functionally gradient materials (FGM) with composition variation from a copper alloy to a soda-lime glass were manufactured using a proprietary nozzle-based multi-material selective laser melting (MMSLM) system. An in situ powder mixing system was designed to mix both metal and glass powders at selective ratios and the mixed powders were dispensed with an ultrasonic vibration powder feeding system with multiple nozzles. From the cross section analysis of the gradient structures, glass proportion increased gradually from the metallic matrix composite (MMC), transition phase to ceramic matrix composite (CMC). The pure copper alloy joined the MMC part and the pure glass phase penetrated into the CMC part during laser processing, which anchored the glass phase, as the main mechanism of combining pure metal and pure glass by FGM in 3D printed parts. From results of indentation, tensile and shear tests on the gradient material samples, it showed that mechanical properties of the FGM gradually changed from ductility (metal side) to brittle (glass side). The weakest part of the FGM structure occurred at the interface between transition phase and the CMC, which was also the interface between the ductile and brittle phases.
Subjects
Copper-glass
Functionally gradient materials
Horizontal gradient structure
Multi-material selective laser melting
Powder bed fusion
Publisher
Elsevier B.V.
Type
journal article