https://scholars.lib.ntu.edu.tw/handle/123456789/74832
標題: | 不同鍍層基板無鉛銲錫球格陣列構裝接點之預處理與冷熱循環試驗 | 作者: | 莊東漢 | 關鍵字: | 表面鍍層(化銀;化金);無鉛銲錫;球格陣列構裝;預處理;冷熱循環試驗;Surface finishes (immersion Ag;immersion Au);Pb-free solders;BGA;Precondition;thermal cycling test | 公開日期: | 2005 | 出版社: | 臺北市:國立臺灣大學材料科學與工程學系暨研究所 | 摘要: | 本計畫針對化銀基板無鉛銲錫球格陣列構裝接點的可靠度分析,進行預處理與冷熱循環試驗。預處理主要在於評估產品對迴銲製程環境的敏感性,冷熱循環試驗則模擬銲錫接點實際開關操作的溫度變化,而冷熱循環試驗包括疲勞壽命評估與疲勞裂紋觀 察兩部份。為了比較化銀基板與其它銲墊表面鍍層的可靠度,本計畫同時涵蓋化金與化錫膜,並選用公認較具潛力的Sn3Ag0.5Cu 無鉛銲錫進行研究。 This project is focused on the study of the reliability of Pb-free solder joints in ball grid array packages when applied with the immersion Ag surface finish. For reliability evaluation, the precondition test and temperature cycling test (TCT) are employed. The precondition test is used for the evaluation of product sensitivity to the environment of reflow processing, while the TCT is for the simulation of the temperature change during the actual on/off operation of the solder joints. The temperature cycling test involves the fatigue life evaluation and the fatigue crack observation. Immersion Au is also employed in this project in order to place the joint reliability of the immersion Ag pad in contrast with other surface finishes. The compositions of Pb-free solders are: Sn3Ag0.5Cu. |
URI: | http://ntur.lib.ntu.edu.tw//handle/246246/12497 | 其他識別: | 932216E002024 | Rights: | 國立臺灣大學材料科學與工程學系暨研究所 |
顯示於: | 材料科學與工程學系 |
檔案 | 描述 | 大小 | 格式 | |
---|---|---|---|---|
932216E002024.pdf | 1.07 MB | Adobe PDF | 檢視/開啟 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。