https://scholars.lib.ntu.edu.tw/handle/123456789/607115
標題: | Considerations of Dielectric Property Deviation and Mechanical Limitations for Antenna-in-Package Fabrication by SiP-Based Stacked Organic Dielectric Substrates at Millimeter-Wave Frequencies | 作者: | Lin Z.-H Lin D.-B Yang C.-S Shen P.-Z Pan C.-L. HSI-TSENG CHOU |
關鍵字: | Antenna array;Antenna in package (AiP);Millimeter wave (mmW) frequency;Organic dielectric substrate;System in package (SiP);Antenna feeders;Beam forming networks;Dielectric materials;Dielectric properties;Directional patterns (antenna);Energy efficiency;Fabrication;Millimeter waves;Radiation effects;Substrates;System-in-package;Antenna in package;Antenna in packages;Dielectric substrates;Feeding circuit;Mechanical;Millimeter wave frequencies;Organic dielectrics;System in package;Systems in packages;Radio transceivers | 公開日期: | 2022 | 卷: | 70 | 期: | 2 | 起(迄)頁: | 1309-1319 | 來源出版物: | IEEE Transactions on Antennas and Propagation | 摘要: | Wireless communications at millimeter-wave (mmW) frequencies suffer high propagation loss and low energy efficiency. The feeding circuits in dielectric substrates may also result in antenna excitation distortions in both phases and amplitudes. Antenna-in-package (AiP) integrating active RF transceivers is considered a reliable means to shorten RF circuit path lengths and connectors to enhance user equipment (UE) antennas' radiation characteristics. However, due to the several mechanical limitations and fabrication uncertainty at mmW frequencies, AiP implementation should better consider geometric parameter effects, which may degrade its radiation performance, to reduce beamforming complexity for easy design and low-cost fabrication. Besides, by taking advantage of active RF transceiver modules to provide output amplitude ratios and phase variations, the feeding circuits can be simplified to shorten the feeding microstrip line lengths. These effects are examined and presented in this article for a practical design of an AiP fabricated for validation by comparing full-wave simulations and measurement results. Simulations and measurements also validate using the calibration technique to simplify the feeding structures to demonstrate the feasibility. ? 1963-2012 IEEE. |
URI: | https://www.scopus.com/inward/record.uri?eid=2-s2.0-85124584683&doi=10.1109%2fTAP.2021.3111340&partnerID=40&md5=488149dcd66c5fedc801ecb5e0256b17 https://scholars.lib.ntu.edu.tw/handle/123456789/607115 |
ISSN: | 0018926X | DOI: | 10.1109/TAP.2021.3111340 |
顯示於: | 電機工程學系 |
在 IR 系統中的文件,除了特別指名其著作權條款之外,均受到著作權保護,並且保留所有的權利。